Is it really possible to do a firmware upgrade without any buttons attached to the module on a ATMega 1280 board? ( The ARM based boards can do it) reason for asking, I have built in a MD module in my cajon...so it is a complete black box solution...just to connect it to USB.
To do a firmware upgrade I now need to unplug it...and replace it in my ARM based device...so I get the buttons and screen.
Best Regards
Angr77
Hypotetical question ....
3 posts
• Page 1 of 1
Hypotetical question ....
by angr77 » Sun Aug 10, 2014 6:19 pm
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
- angr77
- Posts: 622
- Joined: Tue Nov 29, 2011 10:42 pm
- Location: Stockholm, Sweden
Re: Hypotetical question ....
by angr77 » Sun Aug 10, 2014 9:33 pm
Just as I thought then...
thanks Dmitri.
But if i mount three switches...I am guessing I would be fine. Left, up and down.
Best regards
Angr77
thanks Dmitri.But if i mount three switches...I am guessing I would be fine. Left, up and down.
Best regards
Angr77
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
- angr77
- Posts: 622
- Joined: Tue Nov 29, 2011 10:42 pm
- Location: Stockholm, Sweden
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: Google [Bot] and 96 guests