www.megadrum.info

by **dmitri** » Sun Feb 03, 2008 8:21 pm

Can you just erase the device, read it back and post the resulting hex file here?

by **Zakir'S** » Sun Feb 03, 2008 8:28 pm

erased.hex

by **dmitri** » Sun Feb 03, 2008 8:52 pm

Seems alright. Try to program it with "MegaDrum USB MIDI Firmware 18F2550 12MHz V2.hex" file again.

by **Zakir'S** » Sun Feb 03, 2008 9:09 pm

I used the first version of the firmware!!!!! :evil:

I didn't see there was a version 2...

I can see now the device in midi-ox!

Sorry for the waisted time...

by **dmitri** » Sun Feb 03, 2008 9:16 pm

Nothing goes to waste here:)

by **Synthex** » Sun Feb 03, 2008 10:11 pm

Happy end !!

by **Zakir'S** » Sun Feb 03, 2008 10:40 pm

Yes!

Thank you for your help.

by **milk** » Wed Feb 13, 2008 10:38 pm

hey synthex, can this board be used as a generic midi-to-usb interface, or it has something that depends on the megadrum main boards?

by **Synthex** » Thu Feb 14, 2008 6:12 am

milk wrote:hey synthex, can this board be used as a generic midi-to-usb interface, or it has something that depends on the megadrum main boards?

http://www.megadrum.info/forums/viewtopic.php?f=6&t=41

by **chanandlerbong** » Mon Apr 28, 2008 9:33 am

Hello Everybody! I need some help. I built the megadrum but when I connect it to the usb port the pc install it, after coming the problems. The cable is connected to the pc and after a few seconds disconnect ... few seconds later connect and so on. The computer drops the connection. What's the problem? Thank you for your help!!!

www.megadrum.info

(true)MIDI USB Board

Re: (true)MIDI USB Board

Re: (true)MIDI USB Board

Re: (true)MIDI USB Board

Re: (true)MIDI USB Board

Re: (true)MIDI USB Board

Re: (true)MIDI USB Board

Re: (true)MIDI USB Board

Re: (true)MIDI USB Board

Re: (true)MIDI USB Board

Re: (true)MIDI USB Board

Who is online