KIT AVAILABLE !!! All In One v2.7 PCB Kit to sell !!!

[Synthex]

What do MISO and MOSI mean?

MISO = Master Input, Slave Output
MOSI = Master Output, Slave Input

It's for Serial Peripheral Interface Bus (SPI).

[Synthex]

You can use the Jacks PCB board with this kit :

http://www.megadrum.info/forums/viewtopic.php?f=3&t=178



Synthex

[Synthex]

If you need one or several components which you do not find in your city.
I can add them to you in your order !

Synthex

[Wolf]

I want to make my own board using a laser printer and stuff but im interested in buying all the chips.

1)where are the scematics for this version of the board so i can print them out (there's so many version floating around i'm a bit confused)
2) How much would just the chips cost? (I live in Australia )

PS - This is exactly what i have been looking for in a trigger module for my drum kit, nice work

[Synthex]

I want to make my own board using a laser printer and stuff but im interested in buying all the chips.
1)where are the scematics for this version of the board so i can print them out (there's so many version floating around i'm a bit confused)

This double layer PCB (v2.7) is not to be done at home.
The one layer PCB (v2.5) is easier to etch at home :
http://www.megadrum.info/forums/viewtopic.php?f=3&t=198

This double layer design is little better than the others.
The components are best placed and lines of supplies and ground are better distributed, the kit is a little more stable.
The v2.7 have some more features : ext power supply, on board USB connector, ...

2) How much would just the chips cost? (I live in Australia )

Here are the prices :

All In One PCB v2.7 double layer = 14 euros
Programmed Atmega644 20PU = 9 euros
Programmed Atmega32 16PU = 7 euros
Programmed 18F2550 = 5 euros
6N138 = 1 euro
4x 74HC4851 = 7 euros
4x MAX4558 = 7 euros

Shipping cost (required) :
- by Registered Airmail anywhere in the world (signature required) = 9 euros
- by Simple Airmail anywhere in the world (no claim will be possible to transport problems) = 4 euros

PayPal fee (required) = 3 euros

PS - This is exactly what i have been looking for in a trigger module for my drum kit, nice work

Thanks !

[elrules]

As I saw in your last post, synthex, you can order simply the components you need, even only the PCB, isn't it?
I was doubtful of buying your kit cause I already have half the pieces... If you can "customize" your order, maybe I'll PM you if I need some part

Unfortunately I have got my first job and I don't have time to anything a lot of miniprojects are now in idle state... building a 3zone ride, building a kick pedal, installing second piezo on all toms, building megadrum and worst of all, playing drums...

[Synthex]

As I saw in your last post, synthex, you can order simply the components you need, even only the PCB, isn't it?
I was doubtful of buying your kit cause I already have half the pieces... If you can "customize" your order, maybe I'll PM you if I need some part

Yes, you can order simply the components you need, even only the PCB.

[Agung]

hi synthex, i'm from indonesia, can i order your kit?but i already have ATmega32 and 6N138

[Synthex]

hi synthex, i'm from indonesia, can i order your kit?but i already have ATmega32 and 6N138

Of course, you can order my kit.
Send me a PM.

[Synthex]

Do NOT use jumper "USB Power Switch" and "Alim Ext Jumper" at the same time.

Synthex