HH Controler midi events pb

[krickgpe]

I want to put a 10k or 15k resistor on my output pedal HH as is it describe here :
viewtopic.php?f=4&t=761&start=100
but I just want to know want voltage of the resistor I've to choose
because there many different voltage for a 10k resistor.
Thanks.

[dmitri]

Any. Btw, resistors are rated for power not for voltage.

[krickgpe]

so this one is ok ? :
http://www.conrad.fr/ce/fr/product/4053 ... -k-05-W-5-

[dmitri]

Any will do.

[krickgpe]

ok thank you.

[angr77]

Hi!

I have been studying this post for a couple of days... I made a complete mapping of my old Roland TD6... including the fd7 and cy5 for the arm based MegaDRUM a couple of months ago. You can find my settings on http://powerhell.wordpress.com/about/zourman/poor-mans-td-20/megadrum-pad-library for these pads.

I had a value for the pedal on 10 on the low and 470 on the high. I was using a resistor on 15K...but I am not sure it is really required to get it working good!

best regards

Angr77

[krickgpe]

Hi!

I have been studying this post for a couple of days... I made a complete mapping of my old Roland TD6... including the fd7 and cy5 for the arm based MegaDRUM a couple of months ago. You can find my settings on http://powerhell.wordpress.com/about/zourman/poor-mans-td-20/megadrum-pad-library for these pads.

I had a value for the pedal on 10 on the low and 470 on the high. I was using a resistor on 15K...but I am not sure it is really required to get it working good!

best regards

Angr77

Hi, and thank you...I had seen your library pad and download the file for the settings of Cy5 but not for FD7 because the file assigned is named Cy5 also ... is this normal?
For the resistor of 10 or 15K I will try it on my FD8, if I remember you did not have tested this pedal?!... I often come to your web site with all your explanation on MEGADRUM and it helped me to understand how it works and thank you to share your experience because MEGADRUM is not easy to understand for beginners. Thanks

[angr77]

Hmmm...i must have been completely drunk during the x-mas when doing these dialins...

It is a FD8 and I have used a confusing name for the file...

I will change this soon!

Best Regards

Angr77

[krickgpe]

Hmmm...i must have been completely drunk during the x-mas when doing these dialins...

It is a FD8 and I have used a confusing name for the file...

I will change this soon!

Best Regards

Angr77

it´s the settings of an FD8 that you called CY5?
Thanks.

[angr77]

Yes. But it is changed now to FD-8. See my library.

I have also posted my complete MDS file for MegaDRUM...for replacing a TD-6KV.

Best Regards

Angr77