56 inputs MegaDrum module for sale
Posted: Wed Nov 03, 2010 8:18 pmIf, for any reason, you cannot build a MegaDrum module yourself, I can build a module for you.
It takes less than a week for me to build and send a module.
Updated on 09/04/2017: Replaced a 2.2" color LCD option with a 2.4" color LCD option.
Updated on 07/10/2015: Introduced a model in a full aluminium case and reduced the price for the model in an ABS case.
Updated on 06/10/2014: Introduced a new ARM version based on STM32F205RCT6. It runs at 120MHz compared to 72MHz for the older STM32F103RCT6 version.
The ARM STM32F205RCT6 based 56 inputs module with built-in extended EEPROM in a full aluminium case shown here is 215GBP (British Pounds) plus shipping. Shipping to the UK - £16, to EU - £22, to the US and almost to any other country - £29. 19" rack mount ears are detachable and can be attached front or back.
The ARM STM32F205RCT6 based 56 inputs module with built-in extended EEPROM in an ABS case shown here is [s]205GBP 200GBP plus shipping. Shipping to the UK - £16, to EU - £22, to the US and almost to any other country - £29.[/s]
With an optional 1.8" colour 160x128 LCD (as seen in https://youtu.be/7tY2F42GBIY ) included it will cost 5GBP more.
With an optional 2.2" colour 320x240 LCD (as seen in https://youtu.be/pMp64BEYICM ) included it will cost 10GBP more.
With an optional 2.4" colour 320x240 LCD included it will cost 10GBP more.
The colour LCD options are possible only for aluminium cases.
With an optional Positional Sensing addon board included it will cost 25GBP more. See http://www.megadrum.info/forums/viewtop ... f=3&t=2052 for details about the Positional Sensing addon board.
For warranty conditions see http://www.megadrum.info/forums/viewtop ... f=3&t=1669
(for a 32 inputs module see 32 inputs MegaDrum module for sale)
Depending on the availability I can build modules in an ABS case either in a black or grey case.
This is the main board which I use to build modules:
Modules have no labels on them but here is the description:
On the front (from left to right):
1. On/Off switch
2. MIDI LED
3. LCD
4. Controls: LEFT/RIGHT encoder with built-in LEFT button, UP/DOWN buttons, UP/DOWN encoder with built-in RIGHT button.
5. High/Low HiHat impedance selection. Default is Low (Up position) with AltIn in settings set to No.
On the back (from left to right looking from the back) top row:
1. HiHat pedal/controller input
2. Kick
3. HiHat
4. Snare
5. Ride
6. Crash
7. Tom1
8. Tom2
9. Tom3
10. Tom4
11. Aux1
12. Aux2
13. Aux3
14. Aux4
15. Aux5
On the back (from left to right looking from the back) bottom row:
16. Aux6
17. Aux7
18. Aux8
19. Aux9
20. Aux10
21. Aux11
22. Aux12
23. Aux13
24. Aux14
25. Aux15
26. Aux16
27. Aux17
28. Aux18
29. Aux19
I. USB
II. MIDI In
III. MIDI Out
If you are interested, please send me a PM.
It takes less than a week for me to build and send a module.
Updated on 09/04/2017: Replaced a 2.2" color LCD option with a 2.4" color LCD option.
Updated on 07/10/2015: Introduced a model in a full aluminium case and reduced the price for the model in an ABS case.
Updated on 06/10/2014: Introduced a new ARM version based on STM32F205RCT6. It runs at 120MHz compared to 72MHz for the older STM32F103RCT6 version.
The ARM STM32F205RCT6 based 56 inputs module with built-in extended EEPROM in a full aluminium case shown here is 215GBP (British Pounds) plus shipping. Shipping to the UK - £16, to EU - £22, to the US and almost to any other country - £29. 19" rack mount ears are detachable and can be attached front or back.
The ARM STM32F205RCT6 based 56 inputs module with built-in extended EEPROM in an ABS case shown here is [s]205GBP 200GBP plus shipping. Shipping to the UK - £16, to EU - £22, to the US and almost to any other country - £29.[/s]
With an optional 1.8" colour 160x128 LCD (as seen in https://youtu.be/7tY2F42GBIY ) included it will cost 5GBP more.
With an optional 2.2" colour 320x240 LCD (as seen in https://youtu.be/pMp64BEYICM ) included it will cost 10GBP more.
With an optional 2.4" colour 320x240 LCD included it will cost 10GBP more.
The colour LCD options are possible only for aluminium cases.
With an optional Positional Sensing addon board included it will cost 25GBP more. See http://www.megadrum.info/forums/viewtop ... f=3&t=2052 for details about the Positional Sensing addon board.
For warranty conditions see http://www.megadrum.info/forums/viewtop ... f=3&t=1669
(for a 32 inputs module see 32 inputs MegaDrum module for sale)
Depending on the availability I can build modules in an ABS case either in a black or grey case.
This is the main board which I use to build modules:
Modules have no labels on them but here is the description:
On the front (from left to right):
1. On/Off switch
2. MIDI LED
3. LCD
4. Controls: LEFT/RIGHT encoder with built-in LEFT button, UP/DOWN buttons, UP/DOWN encoder with built-in RIGHT button.
5. High/Low HiHat impedance selection. Default is Low (Up position) with AltIn in settings set to No.
On the back (from left to right looking from the back) top row:
1. HiHat pedal/controller input
2. Kick
3. HiHat
4. Snare
5. Ride
6. Crash
7. Tom1
8. Tom2
9. Tom3
10. Tom4
11. Aux1
12. Aux2
13. Aux3
14. Aux4
15. Aux5
On the back (from left to right looking from the back) bottom row:
16. Aux6
17. Aux7
18. Aux8
19. Aux9
20. Aux10
21. Aux11
22. Aux12
23. Aux13
24. Aux14
25. Aux15
26. Aux16
27. Aux17
28. Aux18
29. Aux19
I. USB
II. MIDI In
III. MIDI Out
If you are interested, please send me a PM.