MegaDrum 56 inputs latest schematic and PCB

Discussions related to MegaDrum Hardware

MegaDrum 56 inputs latest schematic and PCB

Postby dmitri » Thu Jun 16, 2011 7:38 pm

This is a schematic and a PCB for a single board MegaDrum 56 inputs with 4851 MUXers.
schematic_small.png

components_small.png


All KiCad and PDF files in one zip file:
megadrum 56 DIP kicad.zip



Warning!
To the best of my knowledge the schematic and the PCB are correct but it has not been tested by me.


1. EEPROM chip (24C256), PIC18F2550 and 6N138 are optional depending on your requirements.
2. Schematics for LCD and controls are the same as in viewtopic.php?f=3&t=266
3. Pinout of the pads connectors is the same as in MegaDrum Kits in viewtopic.php?f=3&t=1420
You do not have the required permissions to view the files attached to this post.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: MegaDrum 56 inputs latest schematic and PCB

Postby sanik_s » Sat Jul 02, 2011 8:34 am

Good work! Please stick this topic.
sanik_s
 
Posts: 10
Joined: Mon Nov 15, 2010 10:43 pm

Re: MegaDrum 56 inputs latest schematic and PCB

Postby peti13 » Mon Jul 25, 2011 5:35 pm

Hi! I've already build an old version of the Megadrum, but now I want to try something else. This PCB looks good, I want to test it, but I have a question. I've already got an ATMEGA32. Could it be good to an equalent for the ATMEGA644? And which firmware is compatible with this? (sorry for my bad english)
peti13
 
Posts: 17
Joined: Sat May 23, 2009 6:14 pm

Re: MegaDrum 56 inputs latest schematic and PCB

Postby dédé » Sun Aug 07, 2011 2:19 pm

Hi,

This one looks great.
Is it the next Megadrum 56i version ?
dédé
 
Posts: 1
Joined: Thu Aug 04, 2011 5:49 pm

Re: MegaDrum 56 inputs latest schematic and PCB

Postby dmitri » Tue Aug 09, 2011 3:04 pm

The only reason for this topic is that people kept asking for a one sided single board PCB layout which uses 4851 multiplexers but nobody had time/skills to amend the Analogue/Digital PCBs and share the results.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: MegaDrum 56 inputs latest schematic and PCB

Postby Krisbo » Wed Aug 17, 2011 2:38 am

Hi guys, I'm new to this forum and somewhat new to electronics. I've been modifying microphones for some time now so I have a basic understanding although microphone schematics are vastly more simple than these projects.

I'm going to have a crack at building the design in this thread. Am I correct in that this in now an amalgamation of the old analogue board/digital board design?

One more thing, does anyone happen to have a pdf of the pcb to connect this board to an input board with pcb mounted jacks?

Thanks, I'll be sure to update you guys with my progress :D

Kris
Krisbo
 
Posts: 4
Joined: Mon Aug 15, 2011 12:31 pm

Re: MegaDrum 56 inputs latest schematic and PCB

Postby Krisbo » Wed Aug 17, 2011 3:01 am

Actually, I'm a little stumped by the concept of this board. If it is designed to replace the separate analogue/digital design, where is the USB connector? Also, I can't see where the DIN5 is on either design.

Little help?

EDIT: I think I may have figured it out. Is CN2 for buttons, CN3 for rotary encoders, CN5 for the MIDI, CN6 for USB? If that is the case, what do CN1 and CN 4 connect to?

EDIT #2: Am I also correct in assuming that BAT85 diodes are no longer a part of the design?

Thanks!
Krisbo
 
Posts: 4
Joined: Mon Aug 15, 2011 12:31 pm

Re: MegaDrum 56 inputs latest schematic and PCB

Postby dmitri » Wed Aug 17, 2011 8:58 am

Krisbo wrote:EDIT: I think I may have figured it out. Is CN2 for buttons, CN3 for rotary encoders, CN5 for the MIDI, CN6 for USB? If that is the case, what do CN1 and CN 4 connect to?

Why did you have to figure it out if you have a schematic and:
dmitri wrote:3. Pinout of the pads connectors is the same as in MegaDrum Kits in viewtopic.php?f=3&t=1420
?
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: MegaDrum 56 inputs latest schematic and PCB

Postby Johnfreeth » Wed Aug 17, 2011 9:09 am

CN1 & CN4 are for the programming cables see the bottom of this link:
http://www.megadrum.info/schematics.php

Bat85 diodes are not used in this design but make sure that you use 4851 IC's and NOT 4051
Johnfreeth
 
Posts: 18
Joined: Tue Feb 23, 2010 5:23 pm
Location: Birmingham UK

Re: MegaDrum 56 inputs latest schematic and PCB

Postby Krisbo » Wed Aug 17, 2011 1:48 pm

dmitri wrote:
Krisbo wrote:EDIT: I think I may have figured it out. Is CN2 for buttons, CN3 for rotary encoders, CN5 for the MIDI, CN6 for USB? If that is the case, what do CN1 and CN 4 connect to?

Why did you have to figure it out if you have a schematic and:
dmitri wrote:3. Pinout of the pads connectors is the same as in MegaDrum Kits in viewtopic.php?f=3&t=1420
?


Thanks dmitri, I missed the PDF with pinouts. I though it was something else :roll:

I'm still getting used to larger schematics. To be perfectly honest I only had a lazy look at it. I might have to get my head around it before I go for the build. I got all the parts today so I'm proper keen to get involved!
Krisbo
 
Posts: 4
Joined: Mon Aug 15, 2011 12:31 pm

Next

Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 110 guests