Page 1 of 23

PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Thu May 08, 2008 1:58 pm
by Synthex
Here is my All In One PCB design with keyboard pullup resistors, to be etch at home.

Note : The double layer design v2.7 is better than this one !
v2.7 link : http://www.megadrum.info/forums/viewtopic.php?f=3&t=187


PCB v2_5 Top.gif

PCB v2_5 Bottom.gif



PCB v2_5 Top 600dpi.gif.zip

PCB v2_5 Bottom 600dpi.gif.zip



Schematic :
MegaDrum32 Synthex Schematics v2.5.gif.zip



All pinouts are the same as v2.3 and v2.4 version.

Synthex

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Fri May 09, 2008 5:49 pm
by Juze
Thanks for this design, we are going to use it next week, when we try to make the pcb again.
Btw, there's pictures of f***ed-up pcb on the other topic, if you haven't seen them. :P

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Thu May 15, 2008 1:26 pm
by Juze
My friend made it to me yesterday.This time it succeeded. I should get it from him, but I'm lazy :D He also made the drillings :O :D. I should post pics, when I go and get it :D

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Fri May 16, 2008 3:32 pm
by Juze
I have the pcb now, I'm now putting components that I already have to it. Synthex, could you make a part list for this pcb? :P

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Fri May 16, 2008 3:55 pm
by lshutt
Synthex, could you re-design this board to use 74hc4851 in smd format? but the rest keeping the same way. I know that already has a smd-to-dip adapter, but with this os kind ugly.
Thanks.

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Fri May 16, 2008 6:06 pm
by Synthex
Juze wrote:I have the pcb now, I'm now putting components that I already have to it. Synthex, could you make a part list for this pcb? :P

You can see the list of components on the top of the PCB. It's the "same" as v2.4.

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Fri May 16, 2008 6:07 pm
by Synthex
lshutt wrote:Synthex, could you re-design this board to use 74hc4851 in smd format? but the rest keeping the same way. I know that already has a smd-to-dip adapter, but with this os kind ugly.
Thanks.

Sorry, but i don't redesign this board for SMD format.
It's difficult to do it in one layer, You can use smd-to-dip adapter.

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Mon May 19, 2008 1:03 pm
by Juze
Here are the pictures of the pcb, that succeeded this time. My friend also drilled the board, but he missed one hole, so I should drill that hole.
Ps. Dunno why the pictures look like the pcb was bended. Pics also look blurry, but so what.

-Juze aka Ghroath

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Mon May 19, 2008 2:58 pm
by dmitri
Looks nice. Make sure you don't have unwanted shortcuts/breaks.

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

PostPosted: Tue May 20, 2008 5:32 pm
by Juze
Yes, Shorts and breaks have already been checked&repaired. Today I soldered some components, that I already have. Soldering joints were horrible, but they work. Also my solder iron sucks so bad. :D I think I'll buy digital solder-station sometime. With that soldering is WAY more easy and better.

-Juze aka Ghroath