Page 1 of 1
megadrum1284_56_20140629.bin / MegaDrum32 - Strange Behavior
Posted:
Thu Jul 03, 2014 12:49 pmby talrusher
Hi,
my md32 Shows strange behavior after updating to the newest Firmware. nothing runs correct, even the Display Shows strange Charakters.
cant Setup anything on the modul, even the contrast.
if i downgrade to megadrum1284_56_20140518.bin everything runs correct. have tried it several times with different configs and Standard config, without solution.
regards
Re: megadrum1284_56_20140629.bin / MegaDrum32 - Strange Beha
Posted:
Thu Jul 10, 2014 5:49 pmby talrusher
found the bug:
i have to disable the new hh-pedal algorythm with md Manager.
edit:
tried to enable new algorythm in older Version and had the same bug.
Re: megadrum1284_56_20140629.bin / MegaDrum32 - Strange Beha
Posted:
Thu Jul 10, 2014 7:35 pmby dmitri
I will check it. It may take some time since I'm away from Saturday till 20th.
Re: megadrum1284_56_20140629.bin / MegaDrum32 - Strange Beha
Posted:
Thu Aug 07, 2014 11:24 pmby sbonasuk
Hi just tried 629 similar behaviour runs slow nothing with work plays a piano note on TOM 4 back to 518 all ok
Re: megadrum1284_56_20140629.bin / MegaDrum32 - Strange Beha
Posted:
Fri Aug 08, 2014 9:47 amby dmitri
For now just disable the new hh-pedal algorithm. Work on this algorithm is not finished yet and it has not been tested thoroughly.
Re: megadrum1284_56_20140629.bin / MegaDrum32 - Strange Beha
Posted:
Fri Aug 08, 2014 11:34 amby sbonasuk
thank you, can you tell me how to disable it
Re: megadrum1284_56_20140629.bin / MegaDrum32 - Strange Beha
Posted:
Fri Aug 08, 2014 1:53 pmby dmitri
By setting Pedal->New Algrthm to No ?
Re: megadrum1284_56_20140629.bin / MegaDrum32 - Strange Beha
Posted:
Fri Aug 08, 2014 6:38 pmby dmitri
Sorry, I just loaded the latest firmware in my test Atmega1284 board and can see the problem now. I will have a fix shortly.
Re: megadrum1284_56_20140629.bin / MegaDrum32 - Strange Beha
Posted:
Sat Aug 09, 2014 12:26 pmby dmitri
I just release a new firmware version with a fix.