www.megadrum.info

I currently have a pretty good setup consisting of a commercial snare (Laurin drum), 3 used yamaha single zone pads I picked up for almost nothing, a diy kick pedal I made using a triggera trigger, a diy Hi hat and Hi hat pedal and a DIY ride. Both of my cymbals are single zone using 27 mm piezos.

I have included my current MD setup as an attachement. I am sure that it is not yet optimal but I am pleased with it except for one point. Simultaneous hits on the hihat and kick often result in just the hihat triggering (no kick). The rest of the time, the kick works well with all other drum pads. Imade sure that the kick and hihat are on different xtalk groups so I do not understand why a hit on the hihat results in a mistrig on the kick ? This happens with or without the hihat pedal plugged in

Can anyone help me figure it out ?

jblain wrote:I have included my current MD setup as an attachement

. ??

jblain wrote: I made sure that the kick and hihat are on different xtalk groups so I do not understand why a hit on the hihat results in a mistrig on the kick
Can anyone help me figure it out ?

This sounds like crosstalk so put them both in the same group and see if that helps.

Isn't what I am experiencing exactly the reverse of xtalk ?

As I understand, Xtalk is when one channel falsely triggers another one

In my case, one channel (Hihat) is preventing another (kick) from correctly triggering.

Here is my config

# MegaDrum config

# Global Misc settings
global_misc.lcd_contrast = 50
global_misc.inputs_count = 32
global_misc.custom_names_en = false
global_misc.config_names_en = false

#Misc settings
misc.note_off = 100
misc.latency = 100
misc.pressroll = 1
misc.octave_shift = 2
misc.all_gains_low = false
misc.big_vu_meter = false
misc.big_vu_split = false
misc.quick_access = false
misc.alt_false_tr_supp = false
misc.inputs_priority = true
misc.midi_thru = false
misc.send_triggered_in = false
misc.alt_note_choking = false

#Pedal settings
pedal.type = true
pedal.new_algorithm = true
pedal.autoLevels = false
pedal.altIn = true
pedal.reverseLevels = false
pedal.curve = 0
pedal.chickDelay = 25
pedal.cc = 4
pedal.ccRdcLvl = 3
pedal.lowLevel = 145
pedal.highLevel = 360
pedal.openLevel = 127
pedal.closedLevel = 10
pedal.shortThres = 0
pedal.longThres = 0
pedal.chickThres = 32
pedal.hhInput = 2
pedal.softChicks = false
pedal.semiOpenLevel = 96
pedal.halfOpenLevel = 64
pedal.chickCurve = 6
pedal.chickPeriodShort = 10
pedal.chickPeriodLong = 23
pedal.chickPeriodDead = 500
pedal.bowSemiOpenNote = 41
pedal.edgeSemiOpenNote = 42
pedal.bellSemiOpenNote = 43
pedal.bowHalfOpenNote = 42
pedal.edgeHalfOpenNote = 42
pedal.bellHalfOpenNote = 43
pedal.bowSemiClosedNote = 42
pedal.edgeSemiClosedNote = 42
pedal.bellSemiClosedNote = 44
pedal.bowClosedNote = 42
pedal.edgeClosedNote = 42
pedal.bellClosedNote = 44
pedal.chickNote = 42
pedal.splashNote = 46

#Input 1 settings
input[1].note = 36
input[1].channel = 9
input[1].curve = 0
input[1].threshold = 30
input[1].retrigger = 50
input[1].levelMax = 400
input[1].minScan = 50
input[1].type = false
input[1].autoLevel = false
input[1].dual = true
input[1].threeWay = false
input[1].function = 0
input[1].gain = 6
input[1].xtalkLevel = 0
input[1].xtalkGroup = 0
input[1].dynTime = 0
input[1].dynLevel = 0
input[1].compression = 0
input[1].shift = 0
input[1].name = 0
input[1].altNote = 36
input[1].pressrollNote = 36
input[1].altNote_linked = false
input[1].pressrollNote_linked = false

#Input 1 positional settings
pos[1].level = 1
pos[1].low = 0
pos[1].high = 48

#Input 2 settings
input[2].note = 18
input[2].channel = 9
input[2].curve = 9
input[2].threshold = 75
input[2].retrigger = 50
input[2].levelMax = 300
input[2].minScan = 50
input[2].type = false
input[2].autoLevel = false
input[2].dual = false
input[2].threeWay = false
input[2].function = 0
input[2].gain = 7
input[2].xtalkLevel = 0
input[2].xtalkGroup = 1
input[2].dynTime = 0
input[2].dynLevel = 0
input[2].compression = 0
input[2].shift = 0
input[2].name = 2
input[2].altNote = 18
input[2].pressrollNote = 18
input[2].altNote_linked = false
input[2].pressrollNote_linked = false

#Input 2 positional settings
pos[2].level = 0
pos[2].low = 5
pos[2].high = 15

#Input 3 settings
input[3].note = 26
input[3].channel = 9
input[3].curve = 1
input[3].threshold = 30
input[3].retrigger = 8
input[3].levelMax = 64
input[3].minScan = 20
input[3].type = false
input[3].autoLevel = true
input[3].dual = false
input[3].threeWay = false
input[3].function = 0
input[3].gain = 4
input[3].xtalkLevel = 0
input[3].xtalkGroup = 1
input[3].dynTime = 6
input[3].dynLevel = 12
input[3].compression = 0
input[3].shift = 0
input[3].name = 0
input[3].altNote = 26
input[3].pressrollNote = 26
input[3].altNote_linked = false
input[3].pressrollNote_linked = false

#Input 3 positional settings
pos[3].level = 0
pos[3].low = 5
pos[3].high = 15

#Third zone for intputs 2 and 3 settings
pad3d_zone[2+3].note = 0
pad3d_zone[2+3].threshold = 0
pad3d_zone[2+3].altNote = 0
pad3d_zone[2+3].pressrollNote = 0
pad3d_zone[2+3].dampenedNote = 26
pad3d_zone[2+3].altNote_linked = false
pad3d_zone[2+3].pressrollNote_linked = false

#Input 4 settings
input[4].note = 38
input[4].channel = 9
input[4].curve = 0
input[4].threshold = 10
input[4].retrigger = 1
input[4].levelMax = 1023
input[4].minScan = 50
input[4].type = false
input[4].autoLevel = false
input[4].dual = false
input[4].threeWay = false
input[4].function = 1
input[4].gain = 6
input[4].xtalkLevel = 7
input[4].xtalkGroup = 2
input[4].dynTime = 4
input[4].dynLevel = 9
input[4].compression = 0
input[4].shift = 0
input[4].name = 0
input[4].altNote = 38
input[4].pressrollNote = 39
input[4].altNote_linked = true
input[4].pressrollNote_linked = true

#Input 4 positional settings
pos[4].level = 3
pos[4].low = 44
pos[4].high = 70

#Input 5 settings
input[5].note = 40
input[5].channel = 9
input[5].curve = 10
input[5].threshold = 75
input[5].retrigger = 8
input[5].levelMax = 255
input[5].minScan = 50
input[5].type = false
input[5].autoLevel = false
input[5].dual = false
input[5].threeWay = false
input[5].function = 0
input[5].gain = 6
input[5].xtalkLevel = 7
input[5].xtalkGroup = 2
input[5].dynTime = 0
input[5].dynLevel = 0
input[5].compression = 0
input[5].shift = 0
input[5].name = 0
input[5].altNote = 40
input[5].pressrollNote = 40
input[5].altNote_linked = true
input[5].pressrollNote_linked = true

#Input 5 positional settings
pos[5].level = 0
pos[5].low = 5
pos[5].high = 15

#Third zone for intputs 4 and 5 settings
pad3d_zone[4+5].note = 0
pad3d_zone[4+5].threshold = 0
pad3d_zone[4+5].altNote = 0
pad3d_zone[4+5].pressrollNote = 0
pad3d_zone[4+5].dampenedNote = 40
pad3d_zone[4+5].altNote_linked = false
pad3d_zone[4+5].pressrollNote_linked = false

#Input 6 settings
input[6].note = 51
input[6].channel = 9
input[6].curve = 0
input[6].threshold = 20
input[6].retrigger = 8
input[6].levelMax = 900
input[6].minScan = 20
input[6].type = false
input[6].autoLevel = false
input[6].dual = false
input[6].threeWay = false
input[6].function = 0
input[6].gain = 9
input[6].xtalkLevel = 0
input[6].xtalkGroup = 3
input[6].dynTime = 6
input[6].dynLevel = 12
input[6].compression = 0
input[6].shift = 0
input[6].name = 0
input[6].altNote = 51
input[6].pressrollNote = 51
input[6].altNote_linked = false
input[6].pressrollNote_linked = false

#Input 6 positional settings
pos[6].level = 0
pos[6].low = 5
pos[6].high = 15

#Input 7 settings
input[7].note = 53
input[7].channel = 9
input[7].curve = 1
input[7].threshold = 30
input[7].retrigger = 8
input[7].levelMax = 64
input[7].minScan = 20
input[7].type = false
input[7].autoLevel = true
input[7].dual = false
input[7].threeWay = false
input[7].function = 0
input[7].gain = 4
input[7].xtalkLevel = 0
input[7].xtalkGroup = 3
input[7].dynTime = 6
input[7].dynLevel = 12
input[7].compression = 0
input[7].shift = 0
input[7].name = 0
input[7].altNote = 53
input[7].pressrollNote = 53
input[7].altNote_linked = false
input[7].pressrollNote_linked = false

#Input 7 positional settings
pos[7].level = 0
pos[7].low = 5
pos[7].high = 15

#Third zone for intputs 6 and 7 settings
pad3d_zone[6+7].note = 0
pad3d_zone[6+7].threshold = 0
pad3d_zone[6+7].altNote = 0
pad3d_zone[6+7].pressrollNote = 0
pad3d_zone[6+7].dampenedNote = 53
pad3d_zone[6+7].altNote_linked = false
pad3d_zone[6+7].pressrollNote_linked = false

#Input 8 settings
input[8].note = 49
input[8].channel = 9
input[8].curve = 1
input[8].threshold = 30
input[8].retrigger = 8
input[8].levelMax = 521
input[8].minScan = 20
input[8].type = false
input[8].autoLevel = true
input[8].dual = false
input[8].threeWay = false
input[8].function = 0
input[8].gain = 4
input[8].xtalkLevel = 0
input[8].xtalkGroup = 4
input[8].dynTime = 6
input[8].dynLevel = 12
input[8].compression = 0
input[8].shift = 0
input[8].name = 0
input[8].altNote = 49
input[8].pressrollNote = 49
input[8].altNote_linked = false
input[8].pressrollNote_linked = false

#Input 8 positional settings
pos[8].level = 0
pos[8].low = 5
pos[8].high = 15

#Input 9 settings
input[9].note = 49
input[9].channel = 9
input[9].curve = 1
input[9].threshold = 30
input[9].retrigger = 8
input[9].levelMax = 64
input[9].minScan = 20
input[9].type = false
input[9].autoLevel = true
input[9].dual = false
input[9].threeWay = false
input[9].function = 0
input[9].gain = 4
input[9].xtalkLevel = 0
input[9].xtalkGroup = 4
input[9].dynTime = 6
input[9].dynLevel = 12
input[9].compression = 0
input[9].shift = 0
input[9].name = 0
input[9].altNote = 49
input[9].pressrollNote = 49
input[9].altNote_linked = false
input[9].pressrollNote_linked = false

#Input 9 positional settings
pos[9].level = 0
pos[9].low = 5
pos[9].high = 15

#Third zone for intputs 8 and 9 settings
pad3d_zone[8+9].note = 0
pad3d_zone[8+9].threshold = 0
pad3d_zone[8+9].altNote = 0
pad3d_zone[8+9].pressrollNote = 0
pad3d_zone[8+9].dampenedNote = 49
pad3d_zone[8+9].altNote_linked = false
pad3d_zone[8+9].pressrollNote_linked = false

#Input 10 settings
input[10].note = 48
input[10].channel = 9
input[10].curve = 0
input[10].threshold = 15
input[10].retrigger = 1
input[10].levelMax = 800
input[10].minScan = 30
input[10].type = false
input[10].autoLevel = false
input[10].dual = false
input[10].threeWay = false
input[10].function = 0
input[10].gain = 9
input[10].xtalkLevel = 0
input[10].xtalkGroup = 5
input[10].dynTime = 3
input[10].dynLevel = 8
input[10].compression = 0
input[10].shift = 0
input[10].name = 0
input[10].altNote = 48
input[10].pressrollNote = 48
input[10].altNote_linked = false
input[10].pressrollNote_linked = false

#Input 10 positional settings
pos[10].level = 0
pos[10].low = 5
pos[10].high = 15

#Input 11 settings
input[11].note = 48
input[11].channel = 9
input[11].curve = 0
input[11].threshold = 30
input[11].retrigger = 8
input[11].levelMax = 64
input[11].minScan = 20
input[11].type = false
input[11].autoLevel = true
input[11].dual = false
input[11].threeWay = false
input[11].function = 0
input[11].gain = 4
input[11].xtalkLevel = 0
input[11].xtalkGroup = 5
input[11].dynTime = 6
input[11].dynLevel = 12
input[11].compression = 0
input[11].shift = 0
input[11].name = 0
input[11].altNote = 48
input[11].pressrollNote = 48
input[11].altNote_linked = false
input[11].pressrollNote_linked = false

#Input 11 positional settings
pos[11].level = 0
pos[11].low = 5
pos[11].high = 15

#Third zone for intputs 10 and 11 settings
pad3d_zone[10+11].note = 0
pad3d_zone[10+11].threshold = 0
pad3d_zone[10+11].altNote = 0
pad3d_zone[10+11].pressrollNote = 0
pad3d_zone[10+11].dampenedNote = 48
pad3d_zone[10+11].altNote_linked = false
pad3d_zone[10+11].pressrollNote_linked = false

#Input 12 settings
input[12].note = 45
input[12].channel = 9
input[12].curve = 0
input[12].threshold = 15
input[12].retrigger = 1
input[12].levelMax = 900
input[12].minScan = 30
input[12].type = false
input[12].autoLevel = false
input[12].dual = false
input[12].threeWay = false
input[12].function = 0
input[12].gain = 9
input[12].xtalkLevel = 0
input[12].xtalkGroup = 6
input[12].dynTime = 3
input[12].dynLevel = 8
input[12].compression = 0
input[12].shift = 0
input[12].name = 0
input[12].altNote = 45
input[12].pressrollNote = 45
input[12].altNote_linked = false
input[12].pressrollNote_linked = false

#Input 12 positional settings
pos[12].level = 0
pos[12].low = 5
pos[12].high = 15

#Input 13 settings
input[13].note = 45
input[13].channel = 9
input[13].curve = 9
input[13].threshold = 70
input[13].retrigger = 8
input[13].levelMax = 1023
input[13].minScan = 20
input[13].type = false
input[13].autoLevel = false
input[13].dual = false
input[13].threeWay = false
input[13].function = 0
input[13].gain = 9
input[13].xtalkLevel = 0
input[13].xtalkGroup = 6
input[13].dynTime = 6
input[13].dynLevel = 12
input[13].compression = 0
input[13].shift = 0
input[13].name = 0
input[13].altNote = 45
input[13].pressrollNote = 45
input[13].altNote_linked = false
input[13].pressrollNote_linked = false

#Input 13 positional settings
pos[13].level = 0
pos[13].low = 5
pos[13].high = 15

#Third zone for intputs 12 and 13 settings
pad3d_zone[12+13].note = 0
pad3d_zone[12+13].threshold = 0
pad3d_zone[12+13].altNote = 0
pad3d_zone[12+13].pressrollNote = 0
pad3d_zone[12+13].dampenedNote = 45
pad3d_zone[12+13].altNote_linked = false
pad3d_zone[12+13].pressrollNote_linked = false

#Input 14 settings
input[14].note = 43
input[14].channel = 9
input[14].curve = 0
input[14].threshold = 30
input[14].retrigger = 1
input[14].levelMax = 1023
input[14].minScan = 75
input[14].type = false
input[14].autoLevel = false
input[14].dual = false
input[14].threeWay = false
input[14].function = 0
input[14].gain = 9
input[14].xtalkLevel = 0
input[14].xtalkGroup = 7
input[14].dynTime = 6
input[14].dynLevel = 7
input[14].compression = 0
input[14].shift = 0
input[14].name = 0
input[14].altNote = 43
input[14].pressrollNote = 43
input[14].altNote_linked = false
input[14].pressrollNote_linked = false

#Input 14 positional settings
pos[14].level = 0
pos[14].low = 5
pos[14].high = 15

#Input 15 settings
input[15].note = 41
input[15].channel = 9
input[15].curve = 1
input[15].threshold = 30
input[15].retrigger = 8
input[15].levelMax = 64
input[15].minScan = 20
input[15].type = false
input[15].autoLevel = true
input[15].dual = false
input[15].threeWay = false
input[15].function = 0
input[15].gain = 4
input[15].xtalkLevel = 0
input[15].xtalkGroup = 7
input[15].dynTime = 6
input[15].dynLevel = 12
input[15].compression = 0
input[15].shift = 0
input[15].name = 0
input[15].altNote = 41
input[15].pressrollNote = 41
input[15].altNote_linked = false
input[15].pressrollNote_linked = false

#Input 15 positional settings
pos[15].level = 0
pos[15].low = 5
pos[15].high = 15

#Third zone for intputs 14 and 15 settings
pad3d_zone[14+15].note = 0
pad3d_zone[14+15].threshold = 0
pad3d_zone[14+15].altNote = 0
pad3d_zone[14+15].pressrollNote = 0
pad3d_zone[14+15].dampenedNote = 41
pad3d_zone[14+15].altNote_linked = false
pad3d_zone[14+15].pressrollNote_linked = false

#Input 16 settings
input[16].note = 43
input[16].channel = 9
input[16].curve = 1
input[16].threshold = 30
input[16].retrigger = 8
input[16].levelMax = 89
input[16].minScan = 20
input[16].type = false
input[16].autoLevel = true
input[16].dual = false
input[16].threeWay = false
input[16].function = 0
input[16].gain = 4
input[16].xtalkLevel = 4
input[16].xtalkGroup = 0
input[16].dynTime = 6
input[16].dynLevel = 12
input[16].compression = 0
input[16].shift = 0
input[16].name = 0
input[16].altNote = 43
input[16].pressrollNote = 43
input[16].altNote_linked = false
input[16].pressrollNote_linked = false

#Input 16 positional settings
pos[16].level = 0
pos[16].low = 5
pos[16].high = 15

#Input 17 settings
input[17].note = 43
input[17].channel = 9
input[17].curve = 1
input[17].threshold = 30
input[17].retrigger = 8
input[17].levelMax = 64
input[17].minScan = 20
input[17].type = false
input[17].autoLevel = true
input[17].dual = false
input[17].threeWay = false
input[17].function = 0
input[17].gain = 4
input[17].xtalkLevel = 4
input[17].xtalkGroup = 0
input[17].dynTime = 6
input[17].dynLevel = 12
input[17].compression = 0
input[17].shift = 0
input[17].name = 0
input[17].altNote = 43
input[17].pressrollNote = 43
input[17].altNote_linked = false
input[17].pressrollNote_linked = false

#Input 17 positional settings
pos[17].level = 0
pos[17].low = 5
pos[17].high = 15

#Third zone for intputs 16 and 17 settings
pad3d_zone[16+17].note = 0
pad3d_zone[16+17].threshold = 0
pad3d_zone[16+17].altNote = 0
pad3d_zone[16+17].pressrollNote = 0
pad3d_zone[16+17].dampenedNote = 43
pad3d_zone[16+17].altNote_linked = false
pad3d_zone[16+17].pressrollNote_linked = false

#Input 18 settings
input[18].note = 57
input[18].channel = 9
input[18].curve = 1
input[18].threshold = 30
input[18].retrigger = 8
input[18].levelMax = 64
input[18].minScan = 20
input[18].type = false
input[18].autoLevel = true
input[18].dual = false
input[18].threeWay = false
input[18].function = 0
input[18].gain = 4
input[18].xtalkLevel = 4
input[18].xtalkGroup = 0
input[18].dynTime = 6
input[18].dynLevel = 12
input[18].compression = 0
input[18].shift = 0
input[18].name = 0
input[18].altNote = 57
input[18].pressrollNote = 57
input[18].altNote_linked = false
input[18].pressrollNote_linked = false

#Input 18 positional settings
pos[18].level = 0
pos[18].low = 5
pos[18].high = 15

#Input 19 settings
input[19].note = 58
input[19].channel = 9
input[19].curve = 1
input[19].threshold = 30
input[19].retrigger = 8
input[19].levelMax = 64
input[19].minScan = 20
input[19].type = false
input[19].autoLevel = true
input[19].dual = false
input[19].threeWay = false
input[19].function = 0
input[19].gain = 4
input[19].xtalkLevel = 4
input[19].xtalkGroup = 0
input[19].dynTime = 6
input[19].dynLevel = 12
input[19].compression = 0
input[19].shift = 0
input[19].name = 0
input[19].altNote = 58
input[19].pressrollNote = 58
input[19].altNote_linked = false
input[19].pressrollNote_linked = false

#Input 19 positional settings
pos[19].level = 0
pos[19].low = 5
pos[19].high = 15

#Third zone for intputs 18 and 19 settings
pad3d_zone[18+19].note = 0
pad3d_zone[18+19].threshold = 0
pad3d_zone[18+19].altNote = 0
pad3d_zone[18+19].pressrollNote = 0
pad3d_zone[18+19].dampenedNote = 58
pad3d_zone[18+19].altNote_linked = false
pad3d_zone[18+19].pressrollNote_linked = false

#Input 20 settings
input[20].note = 62
input[20].channel = 9
input[20].curve = 1
input[20].threshold = 30
input[20].retrigger = 8
input[20].levelMax = 64
input[20].minScan = 20
input[20].type = false
input[20].autoLevel = true
input[20].dual = false
input[20].threeWay = false
input[20].function = 0
input[20].gain = 4
input[20].xtalkLevel = 4
input[20].xtalkGroup = 0
input[20].dynTime = 6
input[20].dynLevel = 12
input[20].compression = 0
input[20].shift = 0
input[20].name = 0
input[20].altNote = 62
input[20].pressrollNote = 62
input[20].altNote_linked = false
input[20].pressrollNote_linked = false

#Input 20 positional settings
pos[20].level = 0
pos[20].low = 5
pos[20].high = 15

#Input 21 settings
input[21].note = 63
input[21].channel = 9
input[21].curve = 1
input[21].threshold = 30
input[21].retrigger = 8
input[21].levelMax = 64
input[21].minScan = 20
input[21].type = false
input[21].autoLevel = true
input[21].dual = false
input[21].threeWay = false
input[21].function = 0
input[21].gain = 4
input[21].xtalkLevel = 4
input[21].xtalkGroup = 0
input[21].dynTime = 6
input[21].dynLevel = 12
input[21].compression = 0
input[21].shift = 0
input[21].name = 0
input[21].altNote = 63
input[21].pressrollNote = 63
input[21].altNote_linked = false
input[21].pressrollNote_linked = false

#Input 21 positional settings
pos[21].level = 0
pos[21].low = 5
pos[21].high = 15

#Third zone for intputs 20 and 21 settings
pad3d_zone[20+21].note = 0
pad3d_zone[20+21].threshold = 0
pad3d_zone[20+21].altNote = 0
pad3d_zone[20+21].pressrollNote = 0
pad3d_zone[20+21].dampenedNote = 63
pad3d_zone[20+21].altNote_linked = false
pad3d_zone[20+21].pressrollNote_linked = false

#Input 22 settings
input[22].note = 63
input[22].channel = 9
input[22].curve = 1
input[22].threshold = 30
input[22].retrigger = 8
input[22].levelMax = 64
input[22].minScan = 20
input[22].type = false
input[22].autoLevel = true
input[22].dual = false
input[22].threeWay = false
input[22].function = 0
input[22].gain = 4
input[22].xtalkLevel = 4
input[22].xtalkGroup = 0
input[22].dynTime = 6
input[22].dynLevel = 12
input[22].compression = 0
input[22].shift = 0
input[22].name = 0
input[22].altNote = 63
input[22].pressrollNote = 63
input[22].altNote_linked = false
input[22].pressrollNote_linked = false

#Input 22 positional settings
pos[22].level = 0
pos[22].low = 5
pos[22].high = 15

#Input 23 settings
input[23].note = 63
input[23].channel = 9
input[23].curve = 1
input[23].threshold = 30
input[23].retrigger = 8
input[23].levelMax = 64
input[23].minScan = 20
input[23].type = false
input[23].autoLevel = true
input[23].dual = false
input[23].threeWay = false
input[23].function = 0
input[23].gain = 4
input[23].xtalkLevel = 4
input[23].xtalkGroup = 0
input[23].dynTime = 6
input[23].dynLevel = 12
input[23].compression = 0
input[23].shift = 0
input[23].name = 0
input[23].altNote = 63
input[23].pressrollNote = 63
input[23].altNote_linked = false
input[23].pressrollNote_linked = false

#Input 23 positional settings
pos[23].level = 0
pos[23].low = 5
pos[23].high = 15

#Third zone for intputs 22 and 23 settings
pad3d_zone[22+23].note = 0
pad3d_zone[22+23].threshold = 0
pad3d_zone[22+23].altNote = 0
pad3d_zone[22+23].pressrollNote = 0
pad3d_zone[22+23].dampenedNote = 63
pad3d_zone[22+23].altNote_linked = false
pad3d_zone[22+23].pressrollNote_linked = false

#Input 24 settings
input[24].note = 63
input[24].channel = 9
input[24].curve = 1
input[24].threshold = 30
input[24].retrigger = 8
input[24].levelMax = 64
input[24].minScan = 20
input[24].type = false
input[24].autoLevel = true
input[24].dual = false
input[24].threeWay = false
input[24].function = 0
input[24].gain = 4
input[24].xtalkLevel = 4
input[24].xtalkGroup = 0
input[24].dynTime = 6
input[24].dynLevel = 12
input[24].compression = 0
input[24].shift = 0
input[24].name = 0
input[24].altNote = 63
input[24].pressrollNote = 63
input[24].altNote_linked = false
input[24].pressrollNote_linked = false

#Input 24 positional settings
pos[24].level = 0
pos[24].low = 5
pos[24].high = 15

#Input 25 settings
input[25].note = 63
input[25].channel = 9
input[25].curve = 1
input[25].threshold = 30
input[25].retrigger = 8
input[25].levelMax = 64
input[25].minScan = 20
input[25].type = false
input[25].autoLevel = true
input[25].dual = false
input[25].threeWay = false
input[25].function = 0
input[25].gain = 4
input[25].xtalkLevel = 4
input[25].xtalkGroup = 0
input[25].dynTime = 6
input[25].dynLevel = 12
input[25].compression = 0
input[25].shift = 0
input[25].name = 0
input[25].altNote = 63
input[25].pressrollNote = 63
input[25].altNote_linked = false
input[25].pressrollNote_linked = false

#Input 25 positional settings
pos[25].level = 0
pos[25].low = 5
pos[25].high = 15

#Third zone for intputs 24 and 25 settings
pad3d_zone[24+25].note = 0
pad3d_zone[24+25].threshold = 0
pad3d_zone[24+25].altNote = 0
pad3d_zone[24+25].pressrollNote = 0
pad3d_zone[24+25].dampenedNote = 63
pad3d_zone[24+25].altNote_linked = false
pad3d_zone[24+25].pressrollNote_linked = false

#Input 26 settings
input[26].note = 63
input[26].channel = 9
input[26].curve = 1
input[26].threshold = 30
input[26].retrigger = 8
input[26].levelMax = 64
input[26].minScan = 20
input[26].type = false
input[26].autoLevel = true
input[26].dual = false
input[26].threeWay = false
input[26].function = 0
input[26].gain = 4
input[26].xtalkLevel = 4
input[26].xtalkGroup = 0
input[26].dynTime = 6
input[26].dynLevel = 12
input[26].compression = 0
input[26].shift = 0
input[26].name = 0
input[26].altNote = 63
input[26].pressrollNote = 63
input[26].altNote_linked = false
input[26].pressrollNote_linked = false

#Input 26 positional settings
pos[26].level = 0
pos[26].low = 5
pos[26].high = 15

#Input 27 settings
input[27].note = 63
input[27].channel = 9
input[27].curve = 1
input[27].threshold = 30
input[27].retrigger = 8
input[27].levelMax = 64
input[27].minScan = 20
input[27].type = false
input[27].autoLevel = true
input[27].dual = false
input[27].threeWay = false
input[27].function = 0
input[27].gain = 4
input[27].xtalkLevel = 4
input[27].xtalkGroup = 0
input[27].dynTime = 6
input[27].dynLevel = 12
input[27].compression = 0
input[27].shift = 0
input[27].name = 0
input[27].altNote = 63
input[27].pressrollNote = 63
input[27].altNote_linked = false
input[27].pressrollNote_linked = false

#Input 27 positional settings
pos[27].level = 0
pos[27].low = 5
pos[27].high = 15

#Third zone for intputs 26 and 27 settings
pad3d_zone[26+27].note = 0
pad3d_zone[26+27].threshold = 0
pad3d_zone[26+27].altNote = 0
pad3d_zone[26+27].pressrollNote = 0
pad3d_zone[26+27].dampenedNote = 63
pad3d_zone[26+27].altNote_linked = false
pad3d_zone[26+27].pressrollNote_linked = false

#Input 28 settings
input[28].note = 63
input[28].channel = 9
input[28].curve = 1
input[28].threshold = 30
input[28].retrigger = 8
input[28].levelMax = 741
input[28].minScan = 20
input[28].type = false
input[28].autoLevel = true
input[28].dual = false
input[28].threeWay = false
input[28].function = 0
input[28].gain = 4
input[28].xtalkLevel = 4
input[28].xtalkGroup = 0
input[28].dynTime = 6
input[28].dynLevel = 12
input[28].compression = 0
input[28].shift = 0
input[28].name = 0
input[28].altNote = 63
input[28].pressrollNote = 63
input[28].altNote_linked = false
input[28].pressrollNote_linked = false

#Input 28 positional settings
pos[28].level = 0
pos[28].low = 5
pos[28].high = 15

#Input 29 settings
input[29].note = 63
input[29].channel = 9
input[29].curve = 1
input[29].threshold = 30
input[29].retrigger = 8
input[29].levelMax = 538
input[29].minScan = 20
input[29].type = false
input[29].autoLevel = true
input[29].dual = false
input[29].threeWay = false
input[29].function = 0
input[29].gain = 4
input[29].xtalkLevel = 4
input[29].xtalkGroup = 0
input[29].dynTime = 6
input[29].dynLevel = 12
input[29].compression = 0
input[29].shift = 0
input[29].name = 0
input[29].altNote = 63
input[29].pressrollNote = 63
input[29].altNote_linked = false
input[29].pressrollNote_linked = false

#Input 29 positional settings
pos[29].level = 0
pos[29].low = 5
pos[29].high = 15

#Third zone for intputs 28 and 29 settings
pad3d_zone[28+29].note = 0
pad3d_zone[28+29].threshold = 0
pad3d_zone[28+29].altNote = 0
pad3d_zone[28+29].pressrollNote = 0
pad3d_zone[28+29].dampenedNote = 63
pad3d_zone[28+29].altNote_linked = false
pad3d_zone[28+29].pressrollNote_linked = false

#Input 30 settings
input[30].note = 63
input[30].channel = 9
input[30].curve = 1
input[30].threshold = 30
input[30].retrigger = 8
input[30].levelMax = 64
input[30].minScan = 20
input[30].type = false
input[30].autoLevel = true
input[30].dual = false
input[30].threeWay = false
input[30].function = 0
input[30].gain = 4
input[30].xtalkLevel = 4
input[30].xtalkGroup = 0
input[30].dynTime = 6
input[30].dynLevel = 12
input[30].compression = 0
input[30].shift = 0
input[30].name = 0
input[30].altNote = 63
input[30].pressrollNote = 63
input[30].altNote_linked = false
input[30].pressrollNote_linked = false

#Input 30 positional settings
pos[30].level = 0
pos[30].low = 5
pos[30].high = 15

#Input 31 settings
input[31].note = 63
input[31].channel = 9
input[31].curve = 1
input[31].threshold = 30
input[31].retrigger = 8
input[31].levelMax = 64
input[31].minScan = 20
input[31].type = false
input[31].autoLevel = true
input[31].dual = false
input[31].threeWay = false
input[31].function = 0
input[31].gain = 4
input[31].xtalkLevel = 4
input[31].xtalkGroup = 0
input[31].dynTime = 6
input[31].dynLevel = 12
input[31].compression = 0
input[31].shift = 0
input[31].name = 0
input[31].altNote = 63
input[31].pressrollNote = 63
input[31].altNote_linked = false
input[31].pressrollNote_linked = false

#Input 31 positional settings
pos[31].level = 0
pos[31].low = 5
pos[31].high = 15

#Third zone for intputs 30 and 31 settings
pad3d_zone[30+31].note = 0
pad3d_zone[30+31].threshold = 0
pad3d_zone[30+31].altNote = 0
pad3d_zone[30+31].pressrollNote = 0
pad3d_zone[30+31].dampenedNote = 63
pad3d_zone[30+31].altNote_linked = false
pad3d_zone[30+31].pressrollNote_linked = false

#Input 32 settings
input[32].note = 0
input[32].channel = 9
input[32].curve = 0
input[32].threshold = 30
input[32].retrigger = 10
input[32].levelMax = 64
input[32].minScan = 20
input[32].type = false
input[32].autoLevel = true
input[32].dual = false
input[32].threeWay = false
input[32].function = 0
input[32].gain = 0
input[32].xtalkLevel = 3
input[32].xtalkGroup = 0
input[32].dynTime = 3
input[32].dynLevel = 4
input[32].compression = 0
input[32].shift = 0
input[32].name = 0
input[32].altNote = 0
input[32].pressrollNote = 0
input[32].altNote_linked = false
input[32].pressrollNote_linked = false

#Input 32 positional settings
pos[32].level = 0
pos[32].low = 5
pos[32].high = 15

#Input 33 settings
input[33].note = 0
input[33].channel = 9
input[33].curve = 0
input[33].threshold = 30
input[33].retrigger = 10
input[33].levelMax = 64
input[33].minScan = 20
input[33].type = false
input[33].autoLevel = true
input[33].dual = false
input[33].threeWay = false
input[33].function = 0
input[33].gain = 0
input[33].xtalkLevel = 3
input[33].xtalkGroup = 0
input[33].dynTime = 3
input[33].dynLevel = 4
input[33].compression = 0
input[33].shift = 0
input[33].name = 0
input[33].altNote = 0
input[33].pressrollNote = 0
input[33].altNote_linked = false
input[33].pressrollNote_linked = false

#Input 33 positional settings
pos[33].level = 0
pos[33].low = 5
pos[33].high = 15

#Third zone for intputs 32 and 33 settings
pad3d_zone[32+33].note = 0
pad3d_zone[32+33].threshold = 30
pad3d_zone[32+33].altNote = 0
pad3d_zone[32+33].pressrollNote = 0
pad3d_zone[32+33].dampenedNote = 0
pad3d_zone[32+33].altNote_linked = false
pad3d_zone[32+33].pressrollNote_linked = false

#Input 34 settings
input[34].note = 0
input[34].channel = 9
input[34].curve = 0
input[34].threshold = 30
input[34].retrigger = 10
input[34].levelMax = 64
input[34].minScan = 20
input[34].type = false
input[34].autoLevel = true
input[34].dual = false
input[34].threeWay = false
input[34].function = 0
input[34].gain = 0
input[34].xtalkLevel = 3
input[34].xtalkGroup = 0
input[34].dynTime = 3
input[34].dynLevel = 4
input[34].compression = 0
input[34].shift = 0
input[34].name = 0
input[34].altNote = 0
input[34].pressrollNote = 0
input[34].altNote_linked = false
input[34].pressrollNote_linked = false

#Input 34 positional settings
pos[34].level = 0
pos[34].low = 5
pos[34].high = 15

#Input 35 settings
input[35].note = 0
input[35].channel = 9
input[35].curve = 0
input[35].threshold = 30
input[35].retrigger = 10
input[35].levelMax = 64
input[35].minScan = 20
input[35].type = false
input[35].autoLevel = true
input[35].dual = false
input[35].threeWay = false
input[35].function = 0
input[35].gain = 0
input[35].xtalkLevel = 3
input[35].xtalkGroup = 0
input[35].dynTime = 3
input[35].dynLevel = 4
input[35].compression = 0
input[35].shift = 0
input[35].name = 0
input[35].altNote = 0
input[35].pressrollNote = 0
input[35].altNote_linked = false
input[35].pressrollNote_linked = false

#Input 35 positional settings
pos[35].level = 0
pos[35].low = 5
pos[35].high = 15

#Third zone for intputs 34 and 35 settings
pad3d_zone[34+35].note = 0
pad3d_zone[34+35].threshold = 30
pad3d_zone[34+35].altNote = 0
pad3d_zone[34+35].pressrollNote = 0
pad3d_zone[34+35].dampenedNote = 0
pad3d_zone[34+35].altNote_linked = false
pad3d_zone[34+35].pressrollNote_linked = false

#Input 36 settings
input[36].note = 0
input[36].channel = 9
input[36].curve = 0
input[36].threshold = 30
input[36].retrigger = 10
input[36].levelMax = 64
input[36].minScan = 20
input[36].type = false
input[36].autoLevel = true
input[36].dual = false
input[36].threeWay = false
input[36].function = 0
input[36].gain = 0
input[36].xtalkLevel = 3
input[36].xtalkGroup = 0
input[36].dynTime = 3
input[36].dynLevel = 4
input[36].compression = 0
input[36].shift = 0
input[36].name = 0
input[36].altNote = 0
input[36].pressrollNote = 0
input[36].altNote_linked = false
input[36].pressrollNote_linked = false

#Input 36 positional settings
pos[36].level = 0
pos[36].low = 5
pos[36].high = 15

#Input 37 settings
input[37].note = 0
input[37].channel = 9
input[37].curve = 0
input[37].threshold = 30
input[37].retrigger = 10
input[37].levelMax = 64
input[37].minScan = 20
input[37].type = false
input[37].autoLevel = true
input[37].dual = false
input[37].threeWay = false
input[37].function = 0
input[37].gain = 0
input[37].xtalkLevel = 3
input[37].xtalkGroup = 0
input[37].dynTime = 3
input[37].dynLevel = 4
input[37].compression = 0
input[37].shift = 0
input[37].name = 0
input[37].altNote = 0
input[37].pressrollNote = 0
input[37].altNote_linked = false
input[37].pressrollNote_linked = false

#Input 37 positional settings
pos[37].level = 0
pos[37].low = 5
pos[37].high = 15

#Third zone for intputs 36 and 37 settings
pad3d_zone[36+37].note = 0
pad3d_zone[36+37].threshold = 30
pad3d_zone[36+37].altNote = 0
pad3d_zone[36+37].pressrollNote = 0
pad3d_zone[36+37].dampenedNote = 0
pad3d_zone[36+37].altNote_linked = false
pad3d_zone[36+37].pressrollNote_linked = false

#Input 38 settings
input[38].note = 0
input[38].channel = 9
input[38].curve = 0
input[38].threshold = 30
input[38].retrigger = 10
input[38].levelMax = 64
input[38].minScan = 20
input[38].type = false
input[38].autoLevel = true
input[38].dual = false
input[38].threeWay = false
input[38].function = 0
input[38].gain = 0
input[38].xtalkLevel = 3
input[38].xtalkGroup = 0
input[38].dynTime = 3
input[38].dynLevel = 4
input[38].compression = 0
input[38].shift = 0
input[38].name = 0
input[38].altNote = 0
input[38].pressrollNote = 0
input[38].altNote_linked = false
input[38].pressrollNote_linked = false

#Input 38 positional settings
pos[38].level = 0
pos[38].low = 5
pos[38].high = 15

#Input 39 settings
input[39].note = 0
input[39].channel = 9
input[39].curve = 0
input[39].threshold = 30
input[39].retrigger = 10
input[39].levelMax = 64
input[39].minScan = 20
input[39].type = false
input[39].autoLevel = true
input[39].dual = false
input[39].threeWay = false
input[39].function = 0
input[39].gain = 0
input[39].xtalkLevel = 3
input[39].xtalkGroup = 0
input[39].dynTime = 3
input[39].dynLevel = 4
input[39].compression = 0
input[39].shift = 0
input[39].name = 0
input[39].altNote = 0
input[39].pressrollNote = 0
input[39].altNote_linked = false
input[39].pressrollNote_linked = false

#Input 39 positional settings
pos[39].level = 0
pos[39].low = 5
pos[39].high = 15

#Third zone for intputs 38 and 39 settings
pad3d_zone[38+39].note = 0
pad3d_zone[38+39].threshold = 30
pad3d_zone[38+39].altNote = 0
pad3d_zone[38+39].pressrollNote = 0
pad3d_zone[38+39].dampenedNote = 0
pad3d_zone[38+39].altNote_linked = false
pad3d_zone[38+39].pressrollNote_linked = false

#Input 40 settings
input[40].note = 0
input[40].channel = 9
input[40].curve = 0
input[40].threshold = 30
input[40].retrigger = 10
input[40].levelMax = 64
input[40].minScan = 20
input[40].type = false
input[40].autoLevel = true
input[40].dual = false
input[40].threeWay = false
input[40].function = 0
input[40].gain = 0
input[40].xtalkLevel = 3
input[40].xtalkGroup = 0
input[40].dynTime = 3
input[40].dynLevel = 4
input[40].compression = 0
input[40].shift = 0
input[40].name = 0
input[40].altNote = 0
input[40].pressrollNote = 0
input[40].altNote_linked = false
input[40].pressrollNote_linked = false

#Input 40 positional settings
pos[40].level = 0
pos[40].low = 5
pos[40].high = 15

#Input 41 settings
input[41].note = 0
input[41].channel = 9
input[41].curve = 0
input[41].threshold = 30
input[41].retrigger = 10
input[41].levelMax = 64
input[41].minScan = 20
input[41].type = false
input[41].autoLevel = true
input[41].dual = false
input[41].threeWay = false
input[41].function = 0
input[41].gain = 0
input[41].xtalkLevel = 3
input[41].xtalkGroup = 0
input[41].dynTime = 3
input[41].dynLevel = 4
input[41].compression = 0
input[41].shift = 0
input[41].name = 0
input[41].altNote = 0
input[41].pressrollNote = 0
input[41].altNote_linked = false
input[41].pressrollNote_linked = false

#Input 41 positional settings
pos[41].level = 0
pos[41].low = 5
pos[41].high = 15

#Third zone for intputs 40 and 41 settings
pad3d_zone[40+41].note = 0
pad3d_zone[40+41].threshold = 30
pad3d_zone[40+41].altNote = 0
pad3d_zone[40+41].pressrollNote = 0
pad3d_zone[40+41].dampenedNote = 0
pad3d_zone[40+41].altNote_linked = false
pad3d_zone[40+41].pressrollNote_linked = false

#Input 42 settings
input[42].note = 0
input[42].channel = 9
input[42].curve = 0
input[42].threshold = 30
input[42].retrigger = 10
input[42].levelMax = 64
input[42].minScan = 20
input[42].type = false
input[42].autoLevel = true
input[42].dual = false
input[42].threeWay = false
input[42].function = 0
input[42].gain = 0
input[42].xtalkLevel = 3
input[42].xtalkGroup = 0
input[42].dynTime = 3
input[42].dynLevel = 4
input[42].compression = 0
input[42].shift = 0
input[42].name = 0
input[42].altNote = 0
input[42].pressrollNote = 0
input[42].altNote_linked = false
input[42].pressrollNote_linked = false

#Input 42 positional settings
pos[42].level = 0
pos[42].low = 5
pos[42].high = 15

#Input 43 settings
input[43].note = 0
input[43].channel = 9
input[43].curve = 0
input[43].threshold = 30
input[43].retrigger = 10
input[43].levelMax = 64
input[43].minScan = 20
input[43].type = false
input[43].autoLevel = true
input[43].dual = false
input[43].threeWay = false
input[43].function = 0
input[43].gain = 0
input[43].xtalkLevel = 3
input[43].xtalkGroup = 0
input[43].dynTime = 3
input[43].dynLevel = 4
input[43].compression = 0
input[43].shift = 0
input[43].name = 0
input[43].altNote = 0
input[43].pressrollNote = 0
input[43].altNote_linked = false
input[43].pressrollNote_linked = false

#Input 43 positional settings
pos[43].level = 0
pos[43].low = 5
pos[43].high = 15

#Third zone for intputs 42 and 43 settings
pad3d_zone[42+43].note = 0
pad3d_zone[42+43].threshold = 30
pad3d_zone[42+43].altNote = 0
pad3d_zone[42+43].pressrollNote = 0
pad3d_zone[42+43].dampenedNote = 0
pad3d_zone[42+43].altNote_linked = false
pad3d_zone[42+43].pressrollNote_linked = false

#Input 44 settings
input[44].note = 0
input[44].channel = 9
input[44].curve = 0
input[44].threshold = 30
input[44].retrigger = 10
input[44].levelMax = 64
input[44].minScan = 20
input[44].type = false
input[44].autoLevel = true
input[44].dual = false
input[44].threeWay = false
input[44].function = 0
input[44].gain = 0
input[44].xtalkLevel = 3
input[44].xtalkGroup = 0
input[44].dynTime = 3
input[44].dynLevel = 4
input[44].compression = 0
input[44].shift = 0
input[44].name = 0
input[44].altNote = 0
input[44].pressrollNote = 0
input[44].altNote_linked = false
input[44].pressrollNote_linked = false

#Input 44 positional settings
pos[44].level = 0
pos[44].low = 5
pos[44].high = 15

#Input 45 settings
input[45].note = 0
input[45].channel = 9
input[45].curve = 0
input[45].threshold = 30
input[45].retrigger = 10
input[45].levelMax = 64
input[45].minScan = 20
input[45].type = false
input[45].autoLevel = true
input[45].dual = false
input[45].threeWay = false
input[45].function = 0
input[45].gain = 0
input[45].xtalkLevel = 3
input[45].xtalkGroup = 0
input[45].dynTime = 3
input[45].dynLevel = 4
input[45].compression = 0
input[45].shift = 0
input[45].name = 0
input[45].altNote = 0
input[45].pressrollNote = 0
input[45].altNote_linked = false
input[45].pressrollNote_linked = false

#Input 45 positional settings
pos[45].level = 0
pos[45].low = 5
pos[45].high = 15

#Third zone for intputs 44 and 45 settings
pad3d_zone[44+45].note = 0
pad3d_zone[44+45].threshold = 30
pad3d_zone[44+45].altNote = 0
pad3d_zone[44+45].pressrollNote = 0
pad3d_zone[44+45].dampenedNote = 0
pad3d_zone[44+45].altNote_linked = false
pad3d_zone[44+45].pressrollNote_linked = false

#Input 46 settings
input[46].note = 0
input[46].channel = 9
input[46].curve = 0
input[46].threshold = 30
input[46].retrigger = 10
input[46].levelMax = 64
input[46].minScan = 20
input[46].type = false
input[46].autoLevel = true
input[46].dual = false
input[46].threeWay = false
input[46].function = 0
input[46].gain = 0
input[46].xtalkLevel = 3
input[46].xtalkGroup = 0
input[46].dynTime = 3
input[46].dynLevel = 4
input[46].compression = 0
input[46].shift = 0
input[46].name = 0
input[46].altNote = 0
input[46].pressrollNote = 0
input[46].altNote_linked = false
input[46].pressrollNote_linked = false

#Input 46 positional settings
pos[46].level = 0
pos[46].low = 5
pos[46].high = 15

#Input 47 settings
input[47].note = 0
input[47].channel = 9
input[47].curve = 0
input[47].threshold = 30
input[47].retrigger = 10
input[47].levelMax = 64
input[47].minScan = 20
input[47].type = false
input[47].autoLevel = true
input[47].dual = false
input[47].threeWay = false
input[47].function = 0
input[47].gain = 0
input[47].xtalkLevel = 3
input[47].xtalkGroup = 0
input[47].dynTime = 3
input[47].dynLevel = 4
input[47].compression = 0
input[47].shift = 0
input[47].name = 0
input[47].altNote = 0
input[47].pressrollNote = 0
input[47].altNote_linked = false
input[47].pressrollNote_linked = false

#Input 47 positional settings
pos[47].level = 0
pos[47].low = 5
pos[47].high = 15

#Third zone for intputs 46 and 47 settings
pad3d_zone[46+47].note = 0
pad3d_zone[46+47].threshold = 30
pad3d_zone[46+47].altNote = 0
pad3d_zone[46+47].pressrollNote = 0
pad3d_zone[46+47].dampenedNote = 0
pad3d_zone[46+47].altNote_linked = false
pad3d_zone[46+47].pressrollNote_linked = false

#Input 48 settings
input[48].note = 0
input[48].channel = 9
input[48].curve = 0
input[48].threshold = 30
input[48].retrigger = 10
input[48].levelMax = 64
input[48].minScan = 20
input[48].type = false
input[48].autoLevel = true
input[48].dual = false
input[48].threeWay = false
input[48].function = 0
input[48].gain = 0
input[48].xtalkLevel = 3
input[48].xtalkGroup = 0
input[48].dynTime = 3
input[48].dynLevel = 4
input[48].compression = 0
input[48].shift = 0
input[48].name = 0
input[48].altNote = 0
input[48].pressrollNote = 0
input[48].altNote_linked = false
input[48].pressrollNote_linked = false

#Input 48 positional settings
pos[48].level = 0
pos[48].low = 5
pos[48].high = 15

#Input 49 settings
input[49].note = 0
input[49].channel = 9
input[49].curve = 0
input[49].threshold = 30
input[49].retrigger = 10
input[49].levelMax = 64
input[49].minScan = 20
input[49].type = false
input[49].autoLevel = true
input[49].dual = false
input[49].threeWay = false
input[49].function = 0
input[49].gain = 0
input[49].xtalkLevel = 3
input[49].xtalkGroup = 0
input[49].dynTime = 3
input[49].dynLevel = 4
input[49].compression = 0
input[49].shift = 0
input[49].name = 0
input[49].altNote = 0
input[49].pressrollNote = 0
input[49].altNote_linked = false
input[49].pressrollNote_linked = false

#Input 49 positional settings
pos[49].level = 0
pos[49].low = 5
pos[49].high = 15

#Third zone for intputs 48 and 49 settings
pad3d_zone[48+49].note = 0
pad3d_zone[48+49].threshold = 30
pad3d_zone[48+49].altNote = 0
pad3d_zone[48+49].pressrollNote = 0
pad3d_zone[48+49].dampenedNote = 0
pad3d_zone[48+49].altNote_linked = false
pad3d_zone[48+49].pressrollNote_linked = false

#Input 50 settings
input[50].note = 0
input[50].channel = 9
input[50].curve = 0
input[50].threshold = 30
input[50].retrigger = 10
input[50].levelMax = 64
input[50].minScan = 20
input[50].type = false
input[50].autoLevel = true
input[50].dual = false
input[50].threeWay = false
input[50].function = 0
input[50].gain = 0
input[50].xtalkLevel = 3
input[50].xtalkGroup = 0
input[50].dynTime = 3
input[50].dynLevel = 4
input[50].compression = 0
input[50].shift = 0
input[50].name = 0
input[50].altNote = 0
input[50].pressrollNote = 0
input[50].altNote_linked = false
input[50].pressrollNote_linked = false

#Input 50 positional settings
pos[50].level = 0
pos[50].low = 5
pos[50].high = 15

#Input 51 settings
input[51].note = 0
input[51].channel = 9
input[51].curve = 0
input[51].threshold = 30
input[51].retrigger = 10
input[51].levelMax = 64
input[51].minScan = 20
input[51].type = false
input[51].autoLevel = true
input[51].dual = false
input[51].threeWay = false
input[51].function = 0
input[51].gain = 0
input[51].xtalkLevel = 3
input[51].xtalkGroup = 0
input[51].dynTime = 3
input[51].dynLevel = 4
input[51].compression = 0
input[51].shift = 0
input[51].name = 0
input[51].altNote = 0
input[51].pressrollNote = 0
input[51].altNote_linked = false
input[51].pressrollNote_linked = false

#Input 51 positional settings
pos[51].level = 0
pos[51].low = 5
pos[51].high = 15

#Third zone for intputs 50 and 51 settings
pad3d_zone[50+51].note = 0
pad3d_zone[50+51].threshold = 30
pad3d_zone[50+51].altNote = 0
pad3d_zone[50+51].pressrollNote = 0
pad3d_zone[50+51].dampenedNote = 0
pad3d_zone[50+51].altNote_linked = false
pad3d_zone[50+51].pressrollNote_linked = false

#Input 52 settings
input[52].note = 0
input[52].channel = 9
input[52].curve = 0
input[52].threshold = 30
input[52].retrigger = 10
input[52].levelMax = 64
input[52].minScan = 20
input[52].type = false
input[52].autoLevel = true
input[52].dual = false
input[52].threeWay = false
input[52].function = 0
input[52].gain = 0
input[52].xtalkLevel = 3
input[52].xtalkGroup = 0
input[52].dynTime = 3
input[52].dynLevel = 4
input[52].compression = 0
input[52].shift = 0
input[52].name = 0
input[52].altNote = 0
input[52].pressrollNote = 0
input[52].altNote_linked = false
input[52].pressrollNote_linked = false

#Input 52 positional settings
pos[52].level = 0
pos[52].low = 5
pos[52].high = 15

#Input 53 settings
input[53].note = 0
input[53].channel = 9
input[53].curve = 0
input[53].threshold = 30
input[53].retrigger = 10
input[53].levelMax = 64
input[53].minScan = 20
input[53].type = false
input[53].autoLevel = true
input[53].dual = false
input[53].threeWay = false
input[53].function = 0
input[53].gain = 0
input[53].xtalkLevel = 3
input[53].xtalkGroup = 0
input[53].dynTime = 3
input[53].dynLevel = 4
input[53].compression = 0
input[53].shift = 0
input[53].name = 0
input[53].altNote = 0
input[53].pressrollNote = 0
input[53].altNote_linked = false
input[53].pressrollNote_linked = false

#Input 53 positional settings
pos[53].level = 0
pos[53].low = 5
pos[53].high = 15

#Third zone for intputs 52 and 53 settings
pad3d_zone[52+53].note = 0
pad3d_zone[52+53].threshold = 30
pad3d_zone[52+53].altNote = 0
pad3d_zone[52+53].pressrollNote = 0
pad3d_zone[52+53].dampenedNote = 0
pad3d_zone[52+53].altNote_linked = false
pad3d_zone[52+53].pressrollNote_linked = false

#Input 54 settings
input[54].note = 0
input[54].channel = 9
input[54].curve = 0
input[54].threshold = 30
input[54].retrigger = 10
input[54].levelMax = 64
input[54].minScan = 20
input[54].type = false
input[54].autoLevel = true
input[54].dual = false
input[54].threeWay = false
input[54].function = 0
input[54].gain = 0
input[54].xtalkLevel = 3
input[54].xtalkGroup = 0
input[54].dynTime = 3
input[54].dynLevel = 4
input[54].compression = 0
input[54].shift = 0
input[54].name = 0
input[54].altNote = 0
input[54].pressrollNote = 0
input[54].altNote_linked = false
input[54].pressrollNote_linked = false

#Input 54 positional settings
pos[54].level = 0
pos[54].low = 5
pos[54].high = 15

#Input 55 settings
input[55].note = 0
input[55].channel = 9
input[55].curve = 0
input[55].threshold = 30
input[55].retrigger = 10
input[55].levelMax = 64
input[55].minScan = 20
input[55].type = false
input[55].autoLevel = true
input[55].dual = false
input[55].threeWay = false
input[55].function = 0
input[55].gain = 0
input[55].xtalkLevel = 3
input[55].xtalkGroup = 0
input[55].dynTime = 3
input[55].dynLevel = 4
input[55].compression = 0
input[55].shift = 0
input[55].name = 0
input[55].altNote = 0
input[55].pressrollNote = 0
input[55].altNote_linked = false
input[55].pressrollNote_linked = false

#Input 55 positional settings
pos[55].level = 0
pos[55].low = 5
pos[55].high = 15

#Third zone for intputs 54 and 55 settings
pad3d_zone[54+55].note = 0
pad3d_zone[54+55].threshold = 30
pad3d_zone[54+55].altNote = 0
pad3d_zone[54+55].pressrollNote = 0
pad3d_zone[54+55].dampenedNote = 0
pad3d_zone[54+55].altNote_linked = false
pad3d_zone[54+55].pressrollNote_linked = false

#Curve 1 settings
curve[1].P1 = 2
curve[1].P2 = 31
curve[1].P3 = 63
curve[1].P4 = 95
curve[1].P5 = 127
curve[1].P6 = 159
curve[1].P7 = 191
curve[1].P8 = 223
curve[1].P9 = 255

#Curve 2 settings
curve[2].P1 = 2
curve[2].P2 = 55
curve[2].P3 = 93
curve[2].P4 = 126
curve[2].P5 = 156
curve[2].P6 = 184
curve[2].P7 = 209
curve[2].P8 = 233
curve[2].P9 = 255

#Curve 3 settings
curve[3].P1 = 2
curve[3].P2 = 78
curve[3].P3 = 122
curve[3].P4 = 157
curve[3].P5 = 184
curve[3].P6 = 208
curve[3].P7 = 226
curve[3].P8 = 243
curve[3].P9 = 255

#Curve 4 settings
curve[4].P1 = 2
curve[4].P2 = 103
curve[4].P3 = 157
curve[4].P4 = 190
curve[4].P5 = 212
curve[4].P6 = 228
curve[4].P7 = 239
curve[4].P8 = 248
curve[4].P9 = 255

#Curve 5 settings
curve[5].P1 = 2
curve[5].P2 = 127
curve[5].P3 = 191
curve[5].P4 = 223
curve[5].P5 = 239
curve[5].P6 = 247
curve[5].P7 = 251
curve[5].P8 = 253
curve[5].P9 = 255

#Curve 6 settings
curve[6].P1 = 2
curve[6].P2 = 13
curve[6].P3 = 30
curve[6].P4 = 48
curve[6].P5 = 72
curve[6].P6 = 99
curve[6].P7 = 134
curve[6].P8 = 178
curve[6].P9 = 255

#Curve 7 settings
curve[7].P1 = 2
curve[7].P2 = 3
curve[7].P3 = 5
curve[7].P4 = 9
curve[7].P5 = 17
curve[7].P6 = 33
curve[7].P7 = 65
curve[7].P8 = 129
curve[7].P9 = 255

#Curve 8 settings
curve[8].P1 = 2
curve[8].P2 = 86
curve[8].P3 = 120
curve[8].P4 = 125
curve[8].P5 = 127
curve[8].P6 = 130
curve[8].P7 = 140
curve[8].P8 = 169
curve[8].P9 = 255

#Curve 9 settings
curve[9].P1 = 2
curve[9].P2 = 4
curve[9].P3 = 10
curve[9].P4 = 34
curve[9].P5 = 127
curve[9].P6 = 212
curve[9].P7 = 239
curve[9].P8 = 253
curve[9].P9 = 255

#Curve 10 settings
curve[10].P1 = 34
curve[10].P2 = 73
curve[10].P3 = 112
curve[10].P4 = 152
curve[10].P5 = 192
curve[10].P6 = 232
curve[10].P7 = 255
curve[10].P8 = 255
curve[10].P9 = 255

#Curve 11 settings
curve[11].P1 = 96
curve[11].P2 = 129
curve[11].P3 = 160
curve[11].P4 = 192
curve[11].P5 = 228
curve[11].P6 = 255
curve[11].P7 = 255
curve[11].P8 = 255
curve[11].P9 = 255

#Curve 12 settings
curve[12].P1 = 255
curve[12].P2 = 255
curve[12].P3 = 255
curve[12].P4 = 255
curve[12].P5 = 255
curve[12].P6 = 255
curve[12].P7 = 255
curve[12].P8 = 255
curve[12].P9 = 255

#Curve 13 settings
curve[13].P1 = 4
curve[13].P2 = 32
curve[13].P3 = 64
curve[13].P4 = 98
curve[13].P5 = 127
curve[13].P6 = 159
curve[13].P7 = 191
curve[13].P8 = 223
curve[13].P9 = 255

#Curve 14 settings
curve[14].P1 = 2
curve[14].P2 = 78
curve[14].P3 = 122
curve[14].P4 = 157
curve[14].P5 = 184
curve[14].P6 = 208
curve[14].P7 = 226
curve[14].P8 = 243
curve[14].P9 = 255

#Curve 15 settings
curve[15].P1 = 2
curve[15].P2 = 3
curve[15].P3 = 5
curve[15].P4 = 9
curve[15].P5 = 17
curve[15].P6 = 33
curve[15].P7 = 65
curve[15].P8 = 129
curve[15].P9 = 255

#Curve 16 settings
curve[16].P1 = 32
curve[16].P2 = 72
curve[16].P3 = 112
curve[16].P4 = 152
curve[16].P5 = 192
curve[16].P6 = 232
curve[16].P7 = 255
curve[16].P8 = 255
curve[16].P9 = 255

#Custom Pads Names
customNameCount = 32
customName[1] = Custom00
customName[2] = Custom01
customName[3] = Custom02
customName[4] = Custom03
customName[5] = Custom04
customName[6] = Custom05
customName[7] = Custom06
customName[8] = Custom07
customName[9] = Custom08
customName[10] = Custom09
customName[11] = Custom10
customName[12] = Custom11
customName[13] = Custom12
customName[14] = Custom13
customName[15] = Custom14
customName[16] = Custom15
customName[17] = Custom16
customName[18] = Custom17
customName[19] = Custom18
customName[20] = Custom19
customName[21] = Custom20
customName[22] = Custom21
customName[23] = Custom22
customName[24] = Custom23
customName[25] = Custom24
customName[26] = Custom25
customName[27] = Custom26
customName[28] = Custom27
customName[29] = Custom28
customName[30] = Custom29
customName[31] = Custom30
customName[32] = Custom31

Why on earth have you posted all that?
Zip your .MDS file and post that, then folks can see what's going on.

Sorry,

I tried uploading the file and I couldn't. Did not realise you had to zip it first

here it is

With regards to your initial problems,

Turn the 3rd zone off on the kick
Once you have set the high level then un-tick high level box.
Put the kick and high hat in the same crosstalk group and increase the crosstalk level as needed.
Turn the re trigger down to 1 if you can

Hi!

I couldn't help myself looking in the file.

I don't know what kind of module you are suing...but it seems like some MISC settings was totally messed up. Latency, Pressroll, Noteoff.

Also - how you have managed to even got the third zone on the kick?...I am guessing that you maybe have edited the mds file in notepad etc...(Impossible to do it in MDM)

I took the freedom to change everything I felt was wrong...And I am attaching the edited mds file based on your problems.

As Airflamedred said the positional sensing, x-talk levels.. etc..

In general you have maximized the gain on all drums. (It seems like you have to compensate this with increased thresholds - I would expect that you loose sensitivity based on this ) Looking on the snare...using gain on 7 and have a high level on 1023...something is wrong here. If you get a high level on 1023 when doing the auto high level task sequence, I am suspecting that your snare piezo too hot.

Auto high level task sequence
Crash course for beginners - On your MD - Move to the PAD you want to measure - Goto AutoHigh Level - set it to YES - press the right alt encoder button...the MD will jump to high level...and starting at 64...you will see it raise when you hit that drum hard a couple of times. Continue until you have reached the maximum level. There you got your high level! Go back and set AutoHigh Level to NO on you MD. From MDM - fetch the high level from MD using "Get All" or GET for that actual pad in to MDM for reference and continued configuration work. Note: This sequence can't be done by just setting the AutoHigh Level checkbox in MDM to True. You have to be at the MD in the menus to perform this task.


Angr77

Yeah, how did you get the kick to show a 3rd zone?. I can't get rid of it.

I wonder also...

In My corrected Mds file, I opened it in notepad and changed dual for the kick input from true to false...

Edit mds files in notepad is not anything I recommend unless you know what you are doing.

Angr77

Thanks guys,

I will try your edited file.

I can confirm that at no time have I ever edited the settings in notepad. For that matter I am not even using mdm except for backups and to view raw midi.

Will get back to you with results. Since only the kick is misbehaving, this might be the cause

Regards