magwa101 wrote:Are you saying I must specifically use Aux 1 (18/19) and Aux2 (20/21) ? I have done this.
No, Aux1/2 are examples. It just must be two consecutive jacks.
Do I have to do SetEdgeSW? I did it, but again, I select "Yes" it goes to "Working", I hit Bell, Edge, Bow, it stays on "Working". If I go to other options, then come back it says SetEdgeSW "No". Right now, it's sitting on "Working".
It will stay "Working" until you press any button on the front panel. I thought I already explained it in http://www.megadrum.info/forums/viewtop ... 207#p32207
All thresholds are 15.
Aux1 is 3way Roland and Switch
Aux 2 is 3way Roland and Switch.
3rd zone is Threshold 0 on Aux 1 and Aux 2.
When I hit Bell/Bow or Edge I get D3 which is Aux1 "Rim/Edge".
And what is wrong with this?
I updated with screen shots of Aux1 and Aux2.
https://goo.gl/photos/53GWYzTNWYYEnURFA
Please attach screenshots here in the forum rather than posting links to other sites.