MDM send/get HiHat Pedal Settings - 7x64

[angr77]

Dmitri, i saw this and did update my MD to the 2012-04-15 version. I have a MD working on 20 mhz...so i have set the freqvency to this value...however I can't say that made the problem to disapper. Should I lower the freqvency? My systems is giving better power. I have messured the power to be higher on my system. ~5.1V

Best regards

Anders

[dmitri]

Dmitri, i saw this and did update my MD to the 2012-04-15 version. I have a MD working on 20 mhz...so i have set the freqvency to this value...however I can't say that made the problem to disapper. Should I lower the freqvency?

No. 20MHz is the the crystal's frequency and the firmware's shown frequency must match it otherwise MIDI speed won't be set correctly. Btw, do you use "USB+MIDI" MIDI Speed?

[angr77]

Yes, I am using USB + MIDI for the moment. (But you can find post where I have been testing different combinations - but not with the latest firmware)

Best Regards

Anders

[talrusher]

have meassured 4,95v on my usb cable... ist this to low? have tried different usb cables from 1m to 5m... allways the same.
have pluged the usb cable to a handy charger with 1,5a from samsung, but get at the end of the cable only 4,8v with this... think it is to low, or not?

[dmitri]

My Windows and Mac laptops give out 4.95-5.05V.

[shuey79]

Was there any fix to this issue? I just got everything up and running on a newer computer but am having this issue. Let me know if I can help at all.

[dmitri]

A fix was added in MDM with version 20121123 - see viewtopic.php?p=22476#p22476

Since then I have not heard about this problem.
If you're having a problem, please start a new topic with the description of the problem.