Sorgan wrote:Ну а распознавание кнопки мегадрамом как то можно определить?
Next screen ChXX: PadName->Threshold:
<Ch04: SnareH >
Threshold: 30
For piezo inputs: Input threshold level. Sets at what minimum (relative electrical) level a signal will be detected as a hit. This is one of the main settings effecting overall performance of the drum kit and the best actual value depends on types of pads used. It may take a while to find the best value.
For switch Rim/Edge inputs: Input switch threshold. Sets below which level the switch is detected as hit/pressed. Note that on the switch Rim/Edge inputs actual velocity is determined by signal from a piezo on a Head/Bow input. The best way to set a correct threshold on a switch input is to use MIDI-OX to monitor 'aftertouch' MIDI messages. With a proper threshold value you should see 2 or 3 (dual zone or 3way/3 zone pad) 'aftertouch on' MIDI messages when you press the switch and 2 or 3 'aftertouch off' MIDI messages when you release the switch.
Users browsing this forum: Google [Bot] and 33 guests