>>> KIT AVAILABLE <<< All In One v3.2 PCB 56i Kit for sale !

[Synthex]

Hi Synthex,
I´m from Brazil and i´m supposed to buy this complete kit(with boards/components/inputs). Well, i want to know if you already have a kit to sell and how long it takes to be sent?

Thanks for all,

Hi mpessanha,

Kits are available and in stock.
The delivery time is about one week for europe and less than two weeks for the rest of the world.

[ArnoNym]

first of alll.....thank you all for your help

once agin .... possible to get a pdf of the KEYBOARD PCB (used in the v3.1 KIT)?

hope anybody can help me out

[Synthex]

possible to get a pdf of the KEYBOARD PCB (used in the v3.1 KIT)?

This PCB is so simple, you can do it with a Protoboard.

KeyBoard.gif

[Synthex]

A very special offer :

More than 30% discount on the FULL KIT (Main Kit and Input Kit) !!

The 56i v3.2 Main Kit : 59 euros (save 30 euros)
- PCB : 1* All In One PCB v3.2 56 inputs (120mm x 100mm)
- PCB : 1* Keyboard PCB (40mm x 34mm)
- ICs : 1* Programmed Atmega644-20PU with normal bootloader (not protected bootloader)
- ICs : 1* Programmed 18F14K50 USB 2.0
- ICs : 7* 74HC4851
- ICs : 1* L7805, 1* 6N138
- Resistors : 1* 47, 1* 470, 2* 100, 4* 220, 3* 1k, 1* 1k5, 11* 4k7, 1* 6k2, 2* 10k, 5* 47k
- Capacitors : 2* 15pF, 2* 22pF, 2* 1nF, 10* 100nF, 1* 470nF, 3* 47uF, 1* 100uF
- Inductors : 1* 68uH
- Diodes : 4* 1N4007, 3* 1N4148
- Crystals : 1* 20MHz, 1* 12MHz
- HE10 Connectors : 1* HDR-2X8, 1* HDR-2X13, 1* HDR-2X20, 1* IDC-2X8, 1* IDC-2X13, 1* IDC-2X20
- .100" Male Polarized Headers Connectors : 2* 2pin, 1* 3pin, 1* 4pin, 4* 5pin, 1* 6pin
- .100" Polarized Connectors with 30 cm leads : 2* 2pin, 1* 3pin, 1* 4pin, 3* 5pin
- .100" Connectors : 2* Jumper
- Connectors : 1* USB Type B Socket
- ICs Sockets : 1* 8 pin, 7* 16 pin, 1* 20 pin, 1* 40 pin
- Display : 1* LCD Display 2*16 White Characters Blue Backlight, 1* Blue LED
- Keyboard : 4* D6 Pushbutton Switch
- Wires : Flat Ribbon Cable 16 Conductors

The 56i v3.2 Inputs Kit : 27 euros (save 10 euros)
- PCB : 1* 32 inputs PCB with USB (180mm x 40mm)
- PCB : 1* 24 inputs PCB (107mm x 40mm)
- Stacked jacks Connectors : 15* CLIFF S1-1125W with 30* CL1406 Nuts
- Connectors : 2* DIN 5 Pin Chassis Socket
- Connectors : 1* USB Type B Socket
- HE10 Connectors : 1* HDR-2X13, 1* IDC-2X13, 1* HDR-2X20, 1* IDC-2X20
- .100" Male Polarized Headers Connectors : 1* 4pin
- .100" Polarized Connectors with 30 cm leads : 1* 4pin
- .100" Connectors : 3* HDR-1X3
- .100" Connectors : 4* Jumper

Registred airmail shipping around the world : 16 euros
Fees : 7 euros
Dmitri's donation : 10 euros

The total of the order for the MAIN KIT and INPUTS KIT is now only 119 euros.


Note :
This offer is valid until June 5th and while stocks last.
No new version is being developed.

[Ken Forgettable]

No new version is being developed

Sorry to see this but £101 is a very tempting offer
Thanks for your efforts Sythex, you got me through USB very nicely, cheers.

[Synthex]

The special offer "More than 30% discount" is now closed.

[Synthex]

The 56i v3.2 Kit is now available with the new protected bootloader !

Prices do not change :
- MAIN KIT is 89 euros (Total is 119 euros).
- MAIN KIT and INPUTS KIT is 126 euros (Total is 159 euros).

[janif]

Hi.

I'm new to Megadrum, I just got my Synthex 3.2 kit working, at least pedal, kick and hihat inputs work, I haven't yet tested others.

I had a little problem with capacitor raster spacing, 47 µF were too wide, fortunately I had right ones myself.

Am I right that for example PEDAL \ HIHAT marking on the input board means pedal is the lower jack and hihat the upper?

And the same applies to other similar markings?

I made a little drawing for back panel, I hope it's useful for others too.

Thank you Synthex and dmitri for a great product!

[Synthex]

I had a little problem with capacitor raster spacing, 47 µF were too wide, fortunately I had right ones myself.

47 µF fits well if you close legs.

Am I right that for example PEDAL \ HIHAT marking on the input board means pedal is the lower jack and hihat the upper?

Yes.

And the same applies to other similar markings?

Yes.

Thank you Synthex and dmitri for a great product!

Thank you !

[janif]

47 µF fits well if you close legs.

That's true, and actually the first thing that came in to my mind, but I was too lazy to do it as I had capacitors with narrow spacing my self.