Atmega bulk order

Discussions related to MegaDrum Hardware

Re: Atmega bulk order

Postby dmitri » Thu Jun 03, 2010 6:34 pm

einkahumor wrote:
r0bbie wrote:I think that if Dmitri sends all megadrum members a PM or e-mail, a lot more people would be interested in getting the protected chip.
Yup, a bulk e-mail or pm would bring a lot more attention to this and definitely boost order count but of course that's for Dmitri to decide.

It can be considered as spam.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: Atmega bulk order

Postby rockdude » Thu Jun 03, 2010 9:44 pm

I think a bulk-order of 10 at a time is sufficient and reasonably comfortable to administer.
rockdude
 
Posts: 276
Joined: Wed Sep 02, 2009 7:18 am

Re: Atmega bulk order

Postby Firelord » Thu Jun 03, 2010 10:17 pm

rockdude wrote:I think a bulk-order of 10 at a time is sufficient and reasonably comfortable to administer.

Yup, and Dmitri will only have to do this 242 times (judging from the forum member count).
Firelord
 
Posts: 666
Joined: Wed Jun 10, 2009 7:50 pm
Location: Estonia

Re: Atmega bulk order

Postby rockdude » Fri Jun 04, 2010 5:03 am

Firelord wrote:
rockdude wrote:I think a bulk-order of 10 at a time is sufficient and reasonably comfortable to administer.

Yup, and Dmitri will only have to do this 242 times (judging from the forum member count).

Sarcasm at it's best? :ugeek:
rockdude
 
Posts: 276
Joined: Wed Sep 02, 2009 7:18 am

Re: Atmega bulk order

Postby Firelord » Fri Jun 04, 2010 11:02 am

rockdude wrote:Sarcasm at it's best? :ugeek:
Sorry! :-) My old shattered vision of the MegaDrum project is still struggling somewhat.
Firelord
 
Posts: 666
Joined: Wed Jun 10, 2009 7:50 pm
Location: Estonia

Re: Atmega bulk order

Postby kenben » Fri Jun 04, 2010 4:21 pm

anyone from canada? i wanna order 2
kenben
 
Posts: 38
Joined: Fri Dec 18, 2009 9:41 am

Re: Atmega bulk order

Postby interrupt0x00 » Fri Jun 04, 2010 6:06 pm

Count me in on a 644-20

trying to figure how much for a USA address.

right now it looks like:
4.19 (for the chip)
0 (shipping from vendor)
.71 (VAT on chip)
3 (uninsured US postage)
5 (handling/flashing)

total
12.90 pounds

did I get that right? I'm new here (I discovered the project and ordered a kit from synthex yesterday) and only just noticed that you are moving to a encrypted bootloader..


-i0

dmitri wrote:
dmitri wrote: I will need to calculate the cost for each person (based on the destination country and insured/uninsured postage cost).

In fact, you can calculate it yourself based on this:
I use Royal Mail for postages.
To EU it will cost £2/£6 uninsured/insured.
To US it will cost £3/£7 uninsured/insured.
To Russia (and probably to other CIS countries but I will need to check it) it will cost £2/£6 uninsured/insured.
For other countries I will need to check the price individually.
interrupt0x00
 
Posts: 2
Joined: Thu Jun 03, 2010 5:10 pm

Re: Atmega bulk order

Postby dmitri » Fri Jun 04, 2010 6:19 pm

interrupt0x00 wrote:5 (handling/flashing)

It is in fact £3 handling fee for now (may change to 5 if I find it takes too much time/packaging material).
And you need to add Paypal surcharge of 5%.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: Atmega bulk order

Postby dmitri » Fri Jun 04, 2010 6:39 pm

Let me make it simple if it's 10 or more at a time.

Uninsured postage to EU, Russia (and maybe CIS countries):
Chip: £4.19 x 1.175 (VAT) = £4.93
Postage: £2
Handling fee: £3
Total: £9.93
Total to pay over Paypal: £9.93 x 1.05 = £10.43

Insured postage to EU, Russia (and maybe CIS countries):
Chip: £4.19 x 1.175 (VAT) = £4.93
Postage: £6
Handling fee: £3
Total: £13.93
Total to pay over Paypal: £13.93 x 1.05 = £14.63

Uninsured postage to US, Canada:
Chip: £4.19 x 1.175 (VAT) = £4.93
Postage: £3
Handling fee: £3
Total: £10.93
Total to pay over Paypal: £10.93 x 1.05 = £11.48

Insured postage to US, Canada:
Chip: £4.19 x 1.175 (VAT) = £4.93
Postage: £7
Handling fee: £3
Total: £14.93
Total to pay over Paypal: £14.93 x 1.05 = £15.68

I think I counted right.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: Atmega bulk order

Postby interrupt0x00 » Fri Jun 04, 2010 7:00 pm

dmitri wrote:Let me make it simple if it's 10 or more at a time.

...

I think I counted right.

fantastic!

I'm assuming:

use the paypal address you use for donations.

include in paypal comments:
name
address
order details (part type and shipping method)

..can I roll a little donation in with that as well, or should I keep that separate?


-i0
interrupt0x00
 
Posts: 2
Joined: Thu Jun 03, 2010 5:10 pm

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 76 guests