>>> KIT AVAILABLE <<< All In One v3.2 PCB 56i Kit for sale !

[Synthex]

Hello, I've received the kit
Thanks Synthex!

I have a question. In the picture of the resistors, capacitors, etc..
There are 2 square yellow components, near the xtal, etc..
I don't have them in the component bag, which one are they?
Maybe is a mistake, I don't see them in the finish picture.

Another..the inductor looks like a big resistor?? is the green one?

Thanks a lot!!
Eduardo.-

The square yellow component is 1 nF capacitor.
In the component bag, it must be a small capacitor with "102" written on it.

The inductor is the big green component (like a resistor)

[pips_94]

hi Synthex

would you please send me the info for order the 56i kit

tanks

[ROCKINROG]

Hi Synthex. I'm in Toronto, Canada and I'm interested in the 56 input kit. Could you send me the info to buy one of these from you.

[cemelo]

hi Synthex,

would you please send me the info for order the 56i kit to Brazil with paypal.

How the hihat pedal do you recommend to use with Megadrum 56i ?
Roland FD-8 is compatible ?

tanks

[ROCKINROG]

I wonder if he's still around as of late?

[ROCKINROG]

I sent you a PM Synthex. Please get in touch when you've got a moment.

[air-v]

A very special offer :

More than 30% discount on the FULL KIT (Main Kit and Input Kit) !!

The 56i v3.2 Main Kit : 59 euros (save 30 euros)
- PCB : 1* All In One PCB v3.2 56 inputs (120mm x 100mm)
- PCB : 1* Keyboard PCB (40mm x 34mm)
- ICs : 1* Programmed Atmega644-20PU with normal bootloader (not protected bootloader)
- ICs : 1* Programmed 18F14K50 USB 2.0
- ICs : 7* 74HC4851
- ICs : 1* L7805, 1* 6N138
- Resistors : 1* 47, 1* 470, 2* 100, 4* 220, 3* 1k, 1* 1k5, 11* 4k7, 1* 6k2, 2* 10k, 5* 47k
- Capacitors : 2* 15pF, 2* 22pF, 2* 1nF, 10* 100nF, 1* 470nF, 3* 47uF, 1* 100uF
- Inductors : 1* 68uH
- Diodes : 4* 1N4007, 3* 1N4148
- Crystals : 1* 20MHz, 1* 12MHz
- HE10 Connectors : 1* HDR-2X8, 1* HDR-2X13, 1* HDR-2X20, 1* IDC-2X8, 1* IDC-2X13, 1* IDC-2X20
- .100" Male Polarized Headers Connectors : 2* 2pin, 1* 3pin, 1* 4pin, 4* 5pin, 1* 6pin
- .100" Polarized Connectors with 30 cm leads : 2* 2pin, 1* 3pin, 1* 4pin, 3* 5pin
- .100" Connectors : 2* Jumper
- Connectors : 1* USB Type B Socket
- ICs Sockets : 1* 8 pin, 7* 16 pin, 1* 20 pin, 1* 40 pin
- Display : 1* LCD Display 2*16 White Characters Blue Backlight, 1* Blue LED
- Keyboard : 4* D6 Pushbutton Switch
- Wires : Flat Ribbon Cable 16 Conductors

The 56i v3.2 Inputs Kit : 27 euros (save 10 euros)
- PCB : 1* 32 inputs PCB with USB (180mm x 40mm)
- PCB : 1* 24 inputs PCB (107mm x 40mm)
- Stacked jacks Connectors : 15* CLIFF S1-1125W with 30* CL1406 Nuts
- Connectors : 2* DIN 5 Pin Chassis Socket
- Connectors : 1* USB Type B Socket
- HE10 Connectors : 1* HDR-2X13, 1* IDC-2X13, 1* HDR-2X20, 1* IDC-2X20
- .100" Male Polarized Headers Connectors : 1* 4pin
- .100" Polarized Connectors with 30 cm leads : 1* 4pin
- .100" Connectors : 3* HDR-1X3
- .100" Connectors : 4* Jumper

Registred airmail shipping around the world : 16 euros
Fees : 7 euros
Dmitri's donation : 10 euros

The total of the order for the MAIN KIT and INPUTS KIT is now only 119 euros.


Note :
This offer is valid until June 5th and while stocks last.
No new version is being developed.

Hi Synthex,
NO MORE SALES for this pre chrimas gift period?????
Best regards
AIR-V

[Synthex]

Hello,

Kits are out of stock at this time ...

[pedro99]

Hi Synthex,

will there be another All in one Kits available this year?

best regards
Andreas

[derbstens]

I'm also very interested in the synthex kit.
Just bought a macbook to run the SD2 Metal Foundry.
I hope the kit will be available again soon.

Cheers

Sebastian