KIT AVAILABLE !!! All In One PCB Kit to sell !!!

[Synthex]

The kit arrived to my home yesterday hehe, is fantastic but... i don't know where to buy the components because in my town there aren't shop to buy electronic components. help me?¿ thanks

Of course, I'll help you.
What can I do for you ?

[slayer666]

Ok, i will ask to my post office this afternoon.

Did you ask about my kit at your post office?

[Synthex]

Is there any chance you will be releasing the Diptrace files for this newest board or even a pdf of the top and bottom for those of us who would like to do it all from scratch.

I love the looks of your kit but I'm sure you will be sold out before I can afford to order one as money is a bit tight right now.

Rod.

A PDF file exists for the first version of this PCB.

A new version will be available soon :
- Double layers
- Optimized design (One layer for power and ground, no strap, MIDI slot on the edge of the PCB, ...)
- External power supply option
- More informations on Top Silk Screening
- ...

[Synthex]

Ok, i will ask to my post office this afternoon.

Did you ask about my kit at your post office?

Yes, the kit was sent on February 22, It arrived in Sweden on February 29 ...

[slayer666]

Ok, i will ask to my post office this afternoon.

Did you ask about my kit at your post office?

Yes, the kit was sent on February 22, It arrived in Sweden on February 29 ...

I just did a search on posten.se (swedish mail) and it said it arrived in sweden on the 29th.
Those bastards didn't send me any info that I had a package waiting for me...

Thanx Synthex.

[Cladinshadows]

Synthex ,

Didn't receive the kit yet but I got my components in the mail today.
I started soldering some stuff and I have a question regarding the pinouts for the HiHat controller.

In your explanation regarding the pinouts for the 32 inputs connector , you have pin 3 and pin 4 ( 40 pin connector ) set up for the HiHat controller.
My question is : which Pin will be the Tip and which will be the ring?
I see one of the pins is for power.

Thanks up front.

You have 4 pins for HiHat :

pin 3 - Power source for HiHat controller (Pedal)
pin 4 - HiHat controller input (Pedal)
pin 7 - HiHat Bow (Tip)
pin 8 - HiHat Edge (Ring)

Yes , but my question is : are Pin 3 and 4 the tip, ring or sleeve ? How do I hook these up to the output jack?

[elrules]

Yes , but my question is : are Pin 3 and 4 the tip, ring or sleeve ? How do I hook these up to the output jack?

I have been wondering the same as you long time, but I didn`t ask before because I`m not still building megadrum. Now it's time to clear that! I have a Roland VH-11 as a hihat. It has a jack input for the cymbal, and a jack input for the controller. Both stereo. As Cladinshadows ask, how do we connect pin 3 and 4 to the jack

[Synthex]

Yes , but my question is : are Pin 3 and 4 the tip, ring or sleeve ? How do I hook these up to the output jack?

I have been wondering the same as you long time, but I didn`t ask before because I`m not still building megadrum. Now it's time to clear that! I have a Roland VH-11 as a hihat. It has a jack input for the cymbal, and a jack input for the controller. Both stereo. As Cladinshadows ask, how do we connect pin 3 and 4 to the jack

Power source for HiHat controller (pin 3) = ring
HiHat controller input (pin 4) = tip
GND = sleeve

pot-wires2.JPG

OR

Power source for HiHat controller (pin 3) = tip
HiHat controller input (pin 4) = ring
GND = sleeve

pot-wires.jpg

But I don't know how the VH-11 is connected !

[bkemmerich]

hi synthex,

just wondering if you've got any more kits or planning on getting more in near future? if so, i definately would like to buy 1, possibly 2.
please get in touch,
basti

[Synthex]

hi synthex,

just wondering if you've got any more kits or planning on getting more in near future? if so, i definately would like to buy 1, possibly 2.
please get in touch,
basti

Yes, I'll get a new version of PCB.
Please send me a PM.

Synthex