(true)MIDI USB Board

Discussions related to MegaDrum Hardware

Re: (true)MIDI USB Board

Postby Synthex » Mon Apr 28, 2008 9:53 am

chanandlerbong wrote:Hello Everybody! I need some help. I built the megadrum but when I connect it to the usb port the pc install it, after coming the problems. The cable is connected to the pc and after a few seconds disconnect ... few seconds later connect and so on. The computer drops the connection. What's the problem? Thank you for your help!!!

Hello,
What is your board ?
Where is your board (in your hand, ...) ?
What is your computer OS ?
Did you verify the welds, the contacts ?
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: (true)MIDI USB Board

Postby chanandlerbong » Mon Apr 28, 2008 11:09 am

Hi Synthex!

What is your board ? - Megadrum32_All_In_One_V2.2
Where is your board (in your hand, ...) ? - In the table not in a case
What is your computer OS ? - winXP sp2
Did you verify the welds, the contacts ? - yes, all welds and contacts ok (my mind)
chanandlerbong
 
Posts: 7
Joined: Mon Apr 28, 2008 9:14 am

Re: (true)MIDI USB Board

Postby chanandlerbong » Mon Apr 28, 2008 11:14 am

Sorry! I improve my comment:

What is your board ? - Megadrum32_All_In_One_V2.2
Where is your board (in your hand, ...) ? - on the table and in my hand when I regulate it. not in a case
What is your computer OS ? - winXP sp2
Did you verify the welds, the contacts ? - yes, all welds and contacts ok (my mind)
chanandlerbong
 
Posts: 7
Joined: Mon Apr 28, 2008 9:14 am

Re: (true)MIDI USB Board

Postby chanandlerbong » Mon Apr 28, 2008 11:17 am

I used this firmware version: MegaDrum USB MIDI Firmware 18F2550 12MHz V2.hex
(Sorry My englis is not too good! )
chanandlerbong
 
Posts: 7
Joined: Mon Apr 28, 2008 9:14 am

Re: (true)MIDI USB Board

Postby Synthex » Mon Apr 28, 2008 4:27 pm

You can check your 12MHz crystal.
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: (true)MIDI USB Board

Postby chanandlerbong » Tue Apr 29, 2008 5:21 am

Synthex wrote:You can check your 12MHz crystal.


The crystal is 12Mhz. How can I check the crystal?
chanandlerbong
 
Posts: 7
Joined: Mon Apr 28, 2008 9:14 am

Re: (true)MIDI USB Board

Postby Synthex » Tue Apr 29, 2008 8:28 am

chanandlerbong wrote:How can I check the crystal?

You can change it by an other one.
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: (true)MIDI USB Board

Postby chanandlerbong » Tue Apr 29, 2008 8:39 am

Synthex wrote:
chanandlerbong wrote:How can I check the crystal?

You can change it by an other one.


ok, but I firstly built into the box the megadrum. If it don't work in the box afterwards I buy a crystal and change it.

Thank you very much the instructions!
chanandlerbong
 
Posts: 7
Joined: Mon Apr 28, 2008 9:14 am

Re: (true)MIDI USB Board

Postby chanandlerbong » Tue Apr 29, 2008 8:42 am

Thank you very much everybody!!!Thank you Synthex and dmitri...!!!! This project is very good!!! :!: :!:
:)
chanandlerbong
 
Posts: 7
Joined: Mon Apr 28, 2008 9:14 am

Re: (true)MIDI USB Board

Postby Synthex » Tue Apr 29, 2008 8:56 am

chanandlerbong wrote:Thank you very much everybody!!!Thank you Synthex and dmitri...!!!! This project is very good!!! :!: :!:
:)

:D
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 68 guests