Latest MegaDrum firmware version

[vadim]

Hello Dmitri,
Here's a screenshot of an issue we've got with the latest firmware. I must say we used to install all the previous firmware versions with Megadrum Manager with zero problems until today. What's wrong? Thanks in advance.

[dmitri]

Did you use the latest MDM version? If it failed in the latest MDM version then use viewtopic.php?f=3&t=1252 - it always works.

[vadim]

Did you use the latest MDM version? If it failed in the latest MDM version then use viewtopic.php?f=3&t=1252 - it always works.

first of all, thanks for a quick response!
Yep we tried the latest version as well, got the following error: "Megadrum is not responding".
Then we used "mdfwupdate" command-line tool and it worked! Thanks a lot!

[ignotus]

Hi Dmitri,
It was a long time since I updated the firmware so I did so today - but I see that the Atmega644 has RAM size-related problems with the latest firmware (so just went with the previous one)... The Atmega32 got phased out some time ago... Is this going to be the fate of the 644 or is it just a blip?

[dmitri]

No, I will sort out this Atmega644 problem, although it's getting harder with the limited RAM on Atmega644.

[ignotus]

Ok, thanks!

[dmitri]

I just released a new firmware version. Sadly, I had to limit number of inputs on Atmega644 to 48 inputs due to RAM limits.

[privatex]

This crosstalk suppression in previous firmware make miracles with my megadrum, and latest feature 'lowering note off delay' seems that is agreeably for positional sensing. Thank you!

[airflamesred]

20141006
I can only set note off delay in MD (not MDM)
Note off delay and pressroll time seemed to be linked.

[vadim]

*deleted*