MegaDrum Manager

[karlarsch]

Hi Dimitri,
maybe You can help me with MDM 20141007:
The MidPoint-Slider from the 3rd Zone jumps back to the previous value, if you send it.
When live-update is enabled, it jumps back at once after releasing.
With best regards,
W.Helbsing, Hamburg

MCU: STM32F103RCT6
Frmw.:20141006
Java: Build 1.7.0_67b01 on Mac 10.8.5

[angr77]

Hi!

Load the attached mds file - This is the config for my e-cajon for ARM based devices. Use the last firmware(07/10) & MDM(Yesterday)

The config file includes config for the first 4 channels. The rest of the channels (up to 32) have been set to default and with the note value 0 - e.g. disabled.

1. If you step through the configuration - You will see that all input slots above 4 will have the config set to note value 0.
2. If you now save the config to the MD using send all or save to slot...all channels above 4 will get a default note values. (Not 0 anymore) It is actually wiping channel 3-4 with other configuration data - not what I had in my config file...
3. I think it is some error here. If going back to previous version of MDM - No problem.

Keep up the good work!

Best Regards

ANGR77

[dmitri]

Indeed. I will look into it.

[dmitri]

maybe You can help me with MDM 20141007:
The MidPoint-Slider from the 3rd Zone jumps back to the previous value, if you send it.
When live-update is enabled, it jumps back at once after releasing.

I just published version 20141009. Please test it, I think I fixed this bug.

[angr77]

Hi Dmitri.

My reported problems did disappear in the 20141009 release.

Best Regards

Angr77

[karlarsch]

Hi Dimitri,
the jumping slider is gone.
Perfect.
Karl

[andy spyzer]

I have the OSX 10.6.8 version. What is the appropriate megadrum manager for this version?

Thanks!!!

[dmitri]

Is there a problem with the latest version from http://www.megadrum.info/content/megadrum-manager ?

[privatex]

I have one question.
I can't send any Hi Hat settings from MDM to MD (HiHat Pedal >> Megadrum, ''SysEx Error''). It wont ''Get'' settings from MD too. When I set up HHpedal with front panel buttons it work all right but MDM situation is the same, theres no synchronization between MDM and MD. Everything else work great. Did you have similar problems?

Regards

[dmitri]

I have one question.
I can't send any Hi Hat settings from MDM to MD (HiHat Pedal >> Megadrum, ''SysEx Error''). It wont ''Get'' settings from MD too. When I set up HHpedal with front panel buttons it work all right but MDM situation is the same, theres no synchronization between MDM and MD. Everything else work great.

Just tested it and it works fine. Did it ever work? MDM version? MegaDrum version? Firmware version? OS version?