Yamaha RHH-135 (Specification and Config)

[rockdude]

I had that in mind too, but don't it would be sufficient enough.

But did you try it?

What about raising the pedal's low level parameter slightly?

It can possibly make chick triggering before the bow.

I'll try both suggestions and get back here with my findings.

[Marsh2112]

How does one reverse tip and ring via either Mega drum manager, or directly in the unit?

[dmitri]

You can use a crossover cable in which tip on one end goes to ring on another end.

[Marsh2112]

A google search for "cross over cable" only seems to pull up internet cables? anyone know what they are called officially or have a link (amazon or otherwise?)

[dmitri]

You can make one yourself using two TRS plugs and a stereo shielded/screened cable. Or you can sacrifice a standard cable - cut it in the middle, solder screens together and solder signal wires across.

[Marsh2112]

Would this work?

http://music.ashbysolutions.com/misc.htm

[dmitri]

It doesn't show wiring anywhere on the page so I cannot verify.

[Thanasis]

I want some help regarding the settings of RHH-135 as I have trouble configuring it especially with drummic'a.Will it have to receive sounds as long i have set it with the given settings both for hh pedal and hh pad? Is there something else i have to do? Thanks

[dmitri]

I want some help regarding the settings of RHH-135 as I have trouble configuring it especially with drummic'a.Will it have to receive sounds as long i have set it with the given settings both for hh pedal and hh pad? Is there something else i have to do? Thanks

I'd try to help but I don't quite (at all) understand what the question is.

[Thanasis]

I am receiving those notes while hitting rhh-135. I've followed these steps http://www.megadrum.info/content/setting-yamaha-style-3-zone-cymbal but receing c2 while hitting the pad