PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Discussions related to MegaDrum Hardware

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby gastric » Fri Sep 12, 2008 9:29 pm

Synthex wrote:
Juze wrote:I have the pcb now, I'm now putting components that I already have to it. Synthex, could you make a part list for this pcb? :P

You can see the list of components on the top of the PCB. It's the "same" as v2.4.


I've attached a list of V2.5 components and confirmed it with Synthex. It does only differ slightly from the V2.4 list.

I'm going to try my best to produce a complete list of all components, including cables, cable ends, case, etc. sourced from Mouser.com to hopefully facilitate easy drag-and-drop ordering of a complete 100% DIY Synthex V2.5 "kit" from within the US. However, due purely to the massive amount of products offered at Mouser.com it'll take some amount of effort to figure out which capacitors/resistors/etc. are appropriate.
You do not have the required permissions to view the files attached to this post.
gastric
 
Posts: 286
Joined: Wed May 14, 2008 1:22 am
Location: Raleigh, NC, USA

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby Synthex » Sat Sep 13, 2008 6:37 pm

Here is a list for Mouser.

It must miss a few components : Atmega32, 18F2550, LCD, 47uF, ...
This is a good start ;)


Mouser #: 649-68001-436HLF
Mfr. #: 68001-436HLF
Desc.: Bergstik Headers 36P UNSHRDED HDR SR THRU-HOLE

Mouser #: 151-8011-E
Mfr. #: 151-8011-E
Desc.: Sockets MINI JUMPER,GF,6.0MM CLOSE TYPE

Mouser #: 568-NYS215
Mfr. #: NYS215
Desc.: Phone Jacks 1/4 STEREO SWITCHED

Mouser #: 81-PV36W103C01B00
Mfr. #: PV36W103C01B00
Desc.: Multi-Turn Potentiometer 10Kohms 10mm Square 25turn

Mouser #: 103-1113-EVX
Mfr. #: 103-1113-EVX
Desc.: Pushbutton Switches MTL BDY BLK STM/CAP

Mouser #: 71-CCF07-J-1.5K
Mfr. #: CCF071K50JNR36
Desc.: 1/4WATT Metal Film Resistors 1/4watt 1.5Kohms 5% Rated to 1/2watt

Mouser #: 71-CCF07-J-47K
Mfr. #: CCF0747K0JKR36
Desc.: 1/4WATT Metal Film Resistors 1/4watt 47Kohms 5% Rated to 1/2watt

Mouser #: 71-CCF0710K0JKE36
Mfr. #: CCF0710K0JKE36
Desc.: 1/4WATT Metal Film Resistors 1/4watt 10Kohms 5% Rated to 1/2watt

Mouser #: 71-CCF07-G-6.2K
Mfr. #: CCF076K20GKR36
Desc.: 1/4WATT Metal Film Resistors 1/4watt 6.2Kohms 2% Rated to 1/2watt

Mouser #: 71-CCF07-J-4.7K/R
Mfr. #: CCF074K70JKR36
Desc.: 1/4WATT Metal Film Resistors 1/4watt 4.7Kohms 5% Rated to 1/2watt

Mouser #: 71-CCF07-J-1K
Mfr. #: CCF071K00JNR36
Desc.: 1/4WATT Metal Film Resistors 1/4watt 1Kohms 5% Rated to 1/2watt

Mouser #: 71-CCF07-J-470
Mfr. #: CCF07470RJKR36
Desc.: 1/4WATT Metal Film Resistors 1/4watt 470ohms 5% Rated to 1/2watt

Mouser #: 71-CCF07220RJKE36
Mfr. #: CCF07220RJKE36
Desc.: 1/4WATT Metal Film Resistors 1/4watt 220ohms 5% Rated to 1/2watt

Mouser #: 71-CCF07100RJKE36
Mfr. #: CCF07100RJKE36
Desc.: 1/4WATT Metal Film Resistors 1/4watt 100ohms 5% Rated to 1/2watt

Mouser #: 43LS103
Mfr. #: 43LS103
Desc.: Miniature Chokes BR/BK/RD/GD 1000uH

Mouser #: 512-1N4148
Mfr. #: 1N4148
Desc.: Diodes - Small Signal 100V Io/200mA BULK

Mouser #: 810-FK24X7R1E474K
Mfr. #: FK24X7R1E474K
Desc.: Monolithic Radial Lead Capacitors 0.47uF 25volts X7R 10% 5.0mm L/S

Mouser #: 594-K224K20X7RF53H5
Mfr. #: K224K20X7RF53H5
Desc.: Ceramic Capacitors .2LS .22UF 50V 10%

Mouser #: 594-K104K15X7RF53H5
Mfr. #: K104K15X7RF53H5
Desc.: Ceramic Capacitors .2LS .1UF 50V 10%

Mouser #: 140-50N5-220J-TB-RC
Mfr. #: 140-50N5-220J-TB-RC
Desc.: Class 1 Ceramic Disc Capacitors - Tape/Box 50V 22pF NPO 5% Tol

Mouser #: 140-50N5-150J-TB-RC
Mfr. #: 140-50N5-150J-TB-RC
Desc.: Class 1 Ceramic Disc Capacitors - Tape/Box 50V 15pF NPO 5% Tol

Mouser #: 604-WP7113QBC/D
Mfr. #: WP7113QBC/D
Desc.: LED Blue BLUE WATER CLEAR

Mouser #: 571-1-390261-9
Mfr. #: 1-390261-9
Desc.: IC Sockets 28P ECONOMY TIN SKT

Mouser #: 649-DILB40P223TLF
Mfr. #: DILB40P223TLF
Desc.: DIP Sockets DILB ASSY

Mouser #: 649-DILB8P223TLF
Mfr. #: DILB8P-223TLF
Desc.: DIP Sockets 8P IC SOCKET

Mouser #: 649-DILB16P-223TLF
Mfr. #: DILB16P-223TLF
Desc.: DIP Sockets 16P SOCKET

Mouser #: 517-3448-89140
Mfr. #: 3448-89140
Desc.: .100" Wire Mount Connectors 40P STRAIN RELIEF FOR 89110 SERIES

Mouser #: 517-3448-89116
Mfr. #: 3448-89116
Desc.: .100" Wire Mount Connectors 16P STRAIN RELIEF FOR 89110 SERIES

Mouser #: 517-89140-0101
Mfr. #: 89140-0101
Desc.: .100" Wire Mount Connectors 40P IDC SOCKET

Mouser #: 517-89116-0101
Mfr. #: 89116-0101
Desc.: .100" Wire Mount Connectors 16P IDC SOCKET

Mouser #: 517-30316-6002
Mfr. #: 30316-6002HB
Desc.: .100" Low Profile Box Headers 16P STRT 4WALL GLDFL

Mouser #: 517-30340-6002
Mfr. #: 30340-6002HB
Desc.: .100" Low Profile Box Headers 40P STRT 4WALL GLDFL

Mouser #: 649-61729-1010BLF
Mfr. #: 61729-1010BLF
Desc.: USB Connectors USB TYPE B CON LEADFREE

Mouser #: 520-HCA1200-SX
Mfr. #: ECS-120-S-1X 12.0
Desc.: HC-49/U Microprocessor Crystals 12MHz SERIES

Mouser #: 520-HCA2000-20X
Mfr. #: ECS-200-20-1X 20.0
Desc.: HC-49/U Microprocessor Crystals 20MHz 20pF

Mouser #: 630-6N138-000E
Mfr. #: 6N138-000E
Desc.: Optocouplers 100 KBd, 2500Vrms

Mouser #: 595-SN74HC4851N
Mfr. #: SN74HC4851N
Desc.: Logic - Signal Switches 8-Ch Analog Mltplxr/Demltplxr
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby gastric » Wed Sep 17, 2008 11:50 am

Here is where I'm at with sourcing all of the necessary V2.5 components via Mouser.com

I'd like to thank Systhex for doing nearly all of the work. Without his assistance I would have surely sourced 90% of the components incorrectly.

Items that still need to be properly sourced are the missing capacitors as well as the 470nF (25v multilayer ceramic) and 220nP (25v multilayer ceramic) capacitors which are on backorder. There's a variety of seemingly viable replacements for the 220nP but I see nothing obvious for the 470nF. Also, Mouser doesn't carry etchant.

To make ordering easy simply

    Open http://www.mouser.com/
    Click EZ Buy
    Login to your Mouser account or create one
    Click BoM tool
    Copy ONLY the Mouser Part # and Quantity columns from the spreadsheet
    Paste them into the large text box
    In the list box next to the Import BOM button select either "current order" or you can create a new project to save for later use and ordering
    Then click Import BOM and your order or project will be created

10/03/08 Edited to remove the spreadsheet from this post so there's not older versions floating around. Use the newer and updated version in the post below this one.
Last edited by gastric on Fri Oct 03, 2008 12:38 pm, edited 1 time in total.
gastric
 
Posts: 286
Joined: Wed May 14, 2008 1:22 am
Location: Raleigh, NC, USA

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby gastric » Sat Sep 20, 2008 11:38 pm

Attached is the updated V2.5 ordering for Mouser.com in Excel and HTM format. Synthex has once again done loads of work reviewing my product choices and suggesting replacements for out of stock items. If anyone finds any errors please let me know as I plan to place an order on Monday and hope to make this project a 1-order success unlike most of my others which require 5 orders from various companies, then a couple re-orders thanks to me screwing it up. ;)


Edited on 10/02/08 to include latest spreadsheet with some better product selections and more product notes in case something is out of stock.

Edited on 11/20/08 to include correct crystals, separate JACKS board BOM, ISCP cable components, and more product notes based on my ongoing experience building this V2.5 board.
You do not have the required permissions to view the files attached to this post.
Last edited by gastric on Thu Nov 20, 2008 6:47 pm, edited 3 times in total.
gastric
 
Posts: 286
Joined: Wed May 14, 2008 1:22 am
Location: Raleigh, NC, USA

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby jman 31 » Sun Sep 21, 2008 1:11 pm

Wow Gastric, That is extremely helpful and very complete. Thanks to you and Synthex for the time spent on this list! My stuff will be on the way some time this coming week if all goes well. 8-)

I have some aluminum angle and some sheet aluminum and an aluminum break, so I'll probably just fab a rack mount box and save the $57. This will be a very affordable project if I don't count my time worth anything! :D

Very Cool!!!!!
jman 31
 
Posts: 536
Joined: Thu Jul 10, 2008 10:51 pm
Location: USA

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby gastric » Sun Sep 21, 2008 1:47 pm

The only thing I didn't see with that specific rack box is PCB standoffs/mounts. I'm unsure how you would fabricate some. I have a variety of computer motherboard standoffs but you'd have to drill-and-tap the rack somehow. Many cases come with standoffs included which would be the preference. Certainly a rack would be seemingly easy to construct if you had the materials, tools, and skills. It's just a rectangular box, removable lid, and some rack ears bolted on. Nothing particularly complicated.

Bud Industries makes similar rack units, also no PCB standoffs. They were out of stock when I first started the spreadsheet but are in stock at the time I write this: 563-CH-14401 $43.50
gastric
 
Posts: 286
Joined: Wed May 14, 2008 1:22 am
Location: Raleigh, NC, USA

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby jamalpiper » Fri Oct 03, 2008 1:29 am

I'm actually placing my order by your list, so thank you this helps alot.

But on you list near the bottom of the caps, you have a surface mount Cap for the 47uF... I'm not using synthex's schematics but it doesn't look like he uses any surface mount components...

I think this might work better.

Mouser Part #: 75-515D476M025JA6AE3

EDIT: I meant to say I'm not using his PCB.
Last edited by jamalpiper on Fri Oct 03, 2008 3:06 pm, edited 1 time in total.
-[K]
jamalpiper
 
Posts: 79
Joined: Wed Aug 06, 2008 11:05 pm
Location: CA, USA

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby gastric » Fri Oct 03, 2008 11:49 am

Synthex reviewed or provided nearly every electronic component in the list so it *should* be correct and accurate. But I think you're probably correct since everything else has a radial termination. I'd have the answer if I'd actually built the board yet. But right now I'm certainly not the right person to ask. :)
gastric
 
Posts: 286
Joined: Wed May 14, 2008 1:22 am
Location: Raleigh, NC, USA

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby gastric » Sat Oct 04, 2008 9:58 pm

Synthex - I think there's an issue with the board images in this thread. I make laser prints at 600dpi on two separate printers of both your jack/input board and the V2.5 board. However, only the jack board prints to the proper size. The V2.5 board always prints slightly too large. Here are two images showing the prints of both boards with a 40P IDE type connector Mouser # 517-30340-6002. It'll be obvious that the V2.5 board is printed too large. It'll be difficult to see the jack board is 100% correct but you can at least see it's not too large.

V2.5
Image


JACKS
Image
gastric
 
Posts: 286
Joined: Wed May 14, 2008 1:22 am
Location: Raleigh, NC, USA

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby Synthex » Sat Oct 04, 2008 10:58 pm

The image is good.
Here is 10*0.1 inch for 600 pixels.
You do not have the required permissions to view the files attached to this post.
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 60 guests