"Megadrum Config Tool" released

[dmitri]

elrules, I just posted a new firmware which has an update to SysEx configuration. I mistakenly was omitting Latency setting from the SysEx misc config before. I've updated menu_layout.pdf now.

[elrules]

Ok, I'll check it out.

[dmitri]

elrules, I've changed gain level bits in the latest version to have a more straight forward meaning. It's in the menu_layout.pdf. Sorry:(

[elrules]

MCT has just been updated to 1.4. It fixes some bugs and adds the firmware version detection

Please, UPDATE YOUR FIRMWARE TO THE LAST ONE 20081218 TO AVOID ERRORS

[elrules]

MCT has just been updated to 1.5. It fixes some bugs and adds an important new feature: THE AUTOMATIC FIRMWARE UPDATE DETECTION!!!

Just run MCT while you are connected to Internet (so it can update itself). If everything works as expected (for me it worked) it will ask megadrum for its firmware version (if you have version 20081216 it will answer to this request). Then, as its version is obsolete, MCT will download the firmware (according to your hardware configuration in MCT) and ask you to update. Works like a charm!! Now, with a few clicks I have my megadrum with firmware up to date!

[Synthex]

Good job elrules !!

[elrules]

MCT has just been updated!!!

Things done:
- Disable inputs by moving the Note slider to the minimum.
- Add support for 40/48 inputs
- Add support for the 3 types of bootloaders (ready)
--- Add a new configuration option to choose between bootloaders
--- Change update process to select the correct bootloader procedure

[dmitri]

Many thanks elrules! I'm about to test it.

[Synthex]

Thanks a lot !! You're the best !

[dmitri]

I've tried firmware update with the latest (v2 + Secure) bootloader and it erases old firmware (that is it does send f0 7f 41 f7) but then it shows an error box with 'error trying to send the sysex file' without actually sending the firmware file.