>>> KIT AVAILABLE <<< All In One v2.8 PCB Kit to sell !

[Synthex]

Here are the LCD displays available :

LCD White Blue.jpg

LCD Blue Black.jpg

LCD Green Black.jpg

[daddy4life85]

Guessing the blue/black looks more black in person Either way they look nice lol.

[hassanm786]

You must connect at least 2 buttons to be able to update the firmware (4 buttons is better).
In this case, LCD is not necessary when connected to PC, but much nicer with !

So if PC can control everything then what is the point of an LCD? Thanks

[Synthex]

Guessing the blue/black looks more black in person Either way they look nice lol.

You can choose the intensity of the backlight with the value of the "R lcd" resistor.
So, you can get "real" black.

[Synthex]

So if PC can control everything then what is the point of an LCD? Thanks

In this case, the LCD is not mandatory.

[Synthex]

For the LCD, you can use for the "R lcd" :
- A 100 ohms resistor for the White / Blue LCD
- A 470 ohms resistor for the Blue / Black LCD
- A 33 ohms or no resistor for the green / Black LCD

[hassanm786]

So my understanding is that this product is actually better then Alises Trigger I/O? Thanks

[Synthex]

So my understanding is that this product is actually better then Alises Trigger I/O? Thanks

For me yes.

[daddy4life85]

Believe it has more inputs, probably more customizable.

[hchriste]

Anything specific to be concerned about with casing. I mean fans to keep temperature down, isolation. ETC.