PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Discussions related to MegaDrum Hardware

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby Lukashenka741 » Fri Dec 23, 2011 6:47 pm

thanks dmitri! but damn :evil: I was sure it will work.. oh well, now I must buy it from you :roll:
Lukashenka741
 
Posts: 32
Joined: Wed Sep 07, 2011 2:09 pm

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby dmitri » Fri Dec 23, 2011 8:12 pm

I have a feeling that even pre-programmed Atmega might not help you.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm


Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby dmitri » Mon Mar 12, 2012 8:18 pm

You can.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: PCB DESIGN - All In One v2.5 - 32 inputs with 74HC4851

Postby jinwon » Wed Jun 11, 2014 3:31 pm

gastric wrote:
Synthex wrote:
Juze wrote:I have the pcb now, I'm now putting components that I already have to it. Synthex, could you make a part list for this pcb? :P

You can see the list of components on the top of the PCB. It's the "same" as v2.4.


I've attached a list of V2.5 components and confirmed it with Synthex. It does only differ slightly from the V2.4 list.

I'm going to try my best to produce a complete list of all components, including cables, cable ends, case, etc. sourced from Mouser.com to hopefully facilitate easy drag-and-drop ordering of a complete 100% DIY Synthex V2.5 "kit" from within the US. However, due purely to the massive amount of products offered at Mouser.com it'll take some amount of effort to figure out which capacitors/resistors/etc. are appropriate.



Hi, I have a question... I compared the list of components file that you uploaded and v2.5 all in one picture... but there are one different thing... there is 47uF Capacitor in the picture... but there is 4.7uF Capacitor(25v radial electrolytic or tantalum) in your file(list of v2.5 components) Which one is correct?? and if 47uF is correct, then Do i have to use 25v radial electrolytic or tantalum type Capacitor??
jinwon
 
Posts: 1
Joined: Mon Jun 17, 2013 3:57 pm

Previous

Return to MegaDrum Hardware

Who is online

Users browsing this forum: No registered users and 75 guests