dmitri wrote:If there are any USB issues then the solution is in viewtopic.php?f=3&t=268
I think we've all seen that. However, before the incident with the MCT everything worked fine via USB in this exact case (at least as far as I understand).
Firmware - Stuck at Send SysEx w/ solution.
Re: Firmware - Stuck at Send SysEx w/ solution.
by Firelord » Fri Sep 04, 2009 10:09 pm
I think we've all seen that. However, before the incident with the MCT everything worked fine via USB in this exact case (at least as far as I understand).
- Firelord
- Posts: 666
- Joined: Wed Jun 10, 2009 7:50 pm
- Location: Estonia
Re: Firmware - Stuck at Send SysEx w/ solution.
by dmitri » Fri Sep 04, 2009 10:19 pm
Firelord wrote:dmitri wrote:If there are any USB issues then the solution is in viewtopic.php?f=3&t=268
I think we've all seen that. However, before the incident with the MCT everything worked fine via USB in this exact case (at least as far as I understand).
The thing is that, provided there are no electrical problems on the board, the original Synthex's firmware may work for some time with no problems and suddenly stop working for no apparent reason. This is due to ungrounded an PGM pin (26) in the original Synthex's USB implementation.
- dmitri
- Site Admin
- Posts: 8709
- Joined: Fri Aug 03, 2007 8:05 pm
Who is online
Users browsing this forum: Google [Bot] and 67 guests