History of MegaDrum firmware versions

Discussions related to MegaDrum Hardware

Re: Latest MegaDrum32 firmware versions

Postby estregan » Sat Feb 23, 2008 3:18 pm

Synthex wrote:Where do you live ?
I'm from the Philippines, hehe. I'll try ebay and farnell. Thanks.
estregan
 
Posts: 116
Joined: Tue Aug 28, 2007 6:24 am

Re: Latest MegaDrum32 firmware versions

Postby dmitri » Sun Feb 24, 2008 1:33 pm

estregan wrote:Only frequency available here is 17.1MHz and 16.9MHz. Can I use that?

I can compile firmware versions for these crystals. Tell me the exact frequency of a crystal you want to use and I'll do it.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum32 firmware versions

Postby Synthex » Fri Mar 21, 2008 1:43 pm

Hello Dmitri,

The Atmega644 have a normal clock at 20MHz.
Then, what is this file : "megadrum644_16_32_20080209.hex" ?
Is it the 24MHz version ?

Thanks.
Synthex
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: Latest MegaDrum32 firmware versions

Postby dmitri » Fri Mar 21, 2008 10:15 pm

No, it's a 16MHz version. Consider it downclocked, power saving version:)
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum32 firmware versions

Postby dmitri » Mon Mar 24, 2008 9:22 pm

24MHz firmware for Atmega644 is included now in new version.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum32 firmware versions

Postby Synthex » Mon Mar 24, 2008 9:40 pm

dmitri wrote:24MHz firmware for Atmega644 is included now in new version.

Thank you ! ;)
Synthex
 
Posts: 1471
Joined: Fri Oct 12, 2007 6:06 am
Location: France

Re: Latest MegaDrum32 firmware versions

Postby estregan » Thu Apr 10, 2008 2:10 pm

dmitri wrote:Changes in 20080406 version:

1. Added per input adjustable "Dynamic Threshold" parameters: Dynamic Threshold Level and Dynamic Threshold Decay Time.


Can you please explain what these new features are for?
estregan
 
Posts: 116
Joined: Tue Aug 28, 2007 6:24 am

Re: Latest MegaDrum32 firmware versions

Postby dmitri » Thu Apr 10, 2008 2:18 pm

The first one determines how high the initial dynamic threshold level is relative to a hit strength.
The second one determines how long it takes for the initial dynamic threshold level to decreases to zero.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

Re: Latest MegaDrum32 firmware versions

Postby slayer666 » Thu Apr 10, 2008 4:58 pm

dmitri wrote:The first one determines how high the initial dynamic threshold level is relative to a hit strength.
The second one determines how long it takes for the initial dynamic threshold level to decreases to zero.

dynlevel goes from 0 to 7 ,please explain how this works
and
dyntime from 8 to 64, is this measured in ms?
slayer666
 
Posts: 178
Joined: Thu Oct 11, 2007 8:07 pm
Location: Sweden

Re: Latest MegaDrum32 firmware versions

Postby dmitri » Thu Apr 10, 2008 6:17 pm

Simplified it goes like this:
Suppose you hit a pad and it produces a peak signal of say 500. Now if Dynamic Threshold Level is set to 0 than an initial dynamic threshold for the pad will be set to a half of the peak signal, i.e. to around 250. Every millisecond this threshold will now decrease until zero. How fast it decreases depends on Dynamic Threshold Decay Time. It can be set to between 8 and 64 millisecond. If Dynamic Threshold Level were set to 7 than an initial dynamic threshold for the pad would be set to around 750.
dmitri
Site Admin
 
Posts: 8706
Joined: Fri Aug 03, 2007 8:05 pm

PreviousNext

Return to MegaDrum Hardware

Who is online

Users browsing this forum: Google [Bot] and 117 guests