This same snare works on tom2, although it`s hotter.
The tom pad connected to snare input gives that same strange values (only 11 on PS2, 0 on PS1, ...).
Everson MD REbuild
Re: Everson MD REbuild
by everson » Wed Mar 20, 2013 6:16 pm
- everson
- Posts: 165
- Joined: Mon Jan 02, 2012 10:14 pm
Re: Everson MD REbuild
by dmitri » Wed Mar 20, 2013 9:44 pm
Something must have happened to the snare input then when you connected the ribbon cable in reverse in the beginning.
- dmitri
- Site Admin
- Posts: 8706
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Everson MD REbuild
by everson » Thu Mar 21, 2013 10:19 am
OK, I think I figured out what was actually the problem.
Snare settings.
I moved the tom2 to snare input (4) and move its settings there as well. And it works.
So, the input 4 PS works as well.
The most different values between toms and snare are threshold and dyn values. So, I`m suspecting the problem is there.
I suspected that from the very beginning, as you may remember, but I was reluctant to change them as I had great triggering ...
I`ll report the results.
Snare settings.
I moved the tom2 to snare input (4) and move its settings there as well. And it works.
So, the input 4 PS works as well.
The most different values between toms and snare are threshold and dyn values. So, I`m suspecting the problem is there.
I suspected that from the very beginning, as you may remember, but I was reluctant to change them as I had great triggering ...
I`ll report the results.
- everson
- Posts: 165
- Joined: Mon Jan 02, 2012 10:14 pm
Re: Everson MD REbuild
by dmitri » Fri Mar 22, 2013 11:23 am
angr77 wrote:Dmitri - I saved a file yesterday with my MD settings and when opening it today, it refuses to read the PS values. (But it is stated in the mdm file using notepad)...Could you just verify if you are able to read back PS settings in MDM ver 20130211?
I think I've fixed it in the latest version (20130322).
- dmitri
- Site Admin
- Posts: 8706
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Everson MD REbuild
by angr77 » Fri Mar 22, 2013 4:11 pm
Dmitri!
Verified - works perfectly!!
Thanks!!!
Verified - works perfectly!!
Thanks!!!
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
- angr77
- Posts: 622
- Joined: Tue Nov 29, 2011 10:42 pm
- Location: Stockholm, Sweden
Re: Everson MD REbuild
by everson » Fri Mar 22, 2013 6:48 pm
Speaking of firmware ...
dmitri, is it possible to add a feature which enables you to see which config is currently loaded?
dmitri, is it possible to add a feature which enables you to see which config is currently loaded?
- everson
- Posts: 165
- Joined: Mon Jan 02, 2012 10:14 pm
Re: Everson MD REbuild
by dmitri » Fri Mar 22, 2013 11:39 pm
everson wrote:Speaking of firmware ...
dmitri, is it possible to add a feature which enables you to see which config is currently loaded?
It may be useful indeed. I will add a screen which shows last loaded/saved config - it might be not a current config since it might have been modified via menu or via SysEx.
- dmitri
- Site Admin
- Posts: 8706
- Joined: Fri Aug 03, 2007 8:05 pm
Re: Everson MD REbuild
by everson » Sat Mar 23, 2013 8:54 am
Yep, very useful. Especially if you have lots of configs and/or change them often.
Or if you save a config, but MD for some reason won't load it on power up. And you don`t know if it loaded that one or some other.
Or if you save a config, but MD for some reason won't load it on power up. And you don`t know if it loaded that one or some other.
- everson
- Posts: 165
- Joined: Mon Jan 02, 2012 10:14 pm
Re: Everson MD REbuild
by angr77 » Sat Mar 23, 2013 9:04 am
Hi!
Interesting idea. Should the MD panel include some kind of revision version field + the date?
Today...as a MD/MDM user, you are responsible to keep track of all changes...and remember what you have done on the journey to reach optimal triggering.
A version field could be useful to help the user! (also that MDM actually logs all sysex changes in a text file)
Was this what you are thinking of?
Angr77
Interesting idea. Should the MD panel include some kind of revision version field + the date?
Today...as a MD/MDM user, you are responsible to keep track of all changes...and remember what you have done on the journey to reach optimal triggering.
A version field could be useful to help the user! (also that MDM actually logs all sysex changes in a text file)
Was this what you are thinking of?
Angr77
Sonor, Drum-Tec heads, Roland CY14, CY12&15R, 2x BT-1 & VH11, 12, 13, Triggera D11, 2xD14, Pintech Dingbat, Letric Moo, Quartz triggers, 2xARM based MegaDRUM, PS Board, M-Audio FT Ultra 8R, Addictive Drums 2.1.6, Surface Pro 5 http://zourman.com
- angr77
- Posts: 622
- Joined: Tue Nov 29, 2011 10:42 pm
- Location: Stockholm, Sweden
Re: Everson MD REbuild
by everson » Sat Mar 23, 2013 9:45 am
A screen which shows the currently loaded config# - that`s pretty much it.
But last saved date of a config could be also useful, I guess ...
But last saved date of a config could be also useful, I guess ...
- everson
- Posts: 165
- Joined: Mon Jan 02, 2012 10:14 pm
Who is online
Users browsing this forum: No registered users and 18 guests