Help additive drum configuration

[Trayp]

Hi everyone !

Recently I finished the construction of megadrum32 all in one 2.5. I programmed the PIC and I was able to upload the firmware 20100516 ATmega32 .

device responds to the piezo

Now I have a problem with the configuration. I do not know how to configure the device with the additive drum . I could use some help someone ?

Regards, Trayp

[angr77]

If it is AD2 you can follow this guide.

http://issuu.com/digitaldrummer/docs/md_ad2_v099_1_

Angr77

[Trayp]

When you want to connect the USB cable MDM gives me an error "error trying to open the MIDI in port : USB midi MegaDrum "

The computer detects megadrum in Device Manager

What could it be?

[ignotus]

I doubt MDM supports such an old firmware anyway so you'll probably have to configure your MD at the module itself.

[angr77]

Hi!
Most often when you get these type of errors...the MD Midi port crashes when it is shared between a VST (like AD2) and MDM.

This is why MD has two midi ports. 1&2. They are equal. Suggestion: Set MD midi port 1 to MDM and MD Midi Port 2 to AD2.

However - I don't know who it looks in the old firmwares.

ANGR77