Positional Sensing not working - SOLVED

[privatex]

Yes some inputs have different features. Same 3 zone cymbal on two different stereo inputs , with identic configuration behave drifferently in my set, so yes airflamesred got a point.

[dmitri]

I have noticed that input 55 doesn't seem to update after doing a 'send all'. It stays blue.

Just tried to reproduce it and it turns black. If you do really have this problem, please open a new topic with the steps to reproduce it and I work on it.

[privatex]

'pins numbers on the main board don't translate to input numbers.'
Ok pins for that input are 8 and 9, I can see that in MDM clearly now. I forgot on this features. Im interested in this phenomenon of different triggering on two inputs (without inputs priority checked).

[dmitri]

'pins numbers on the main board don't translate to input numbers.'
Ok pins for that input are 8 and 9, I can see that in MDM clearly now. I forgot on this features. Im interested in this phenomenon of different triggering on two inputs (without inputs priority checked).

Unless this difference is between inputs with precision rectifiers (on MegaDrum with PS addon) and inputs without, this difference shouldn't be noticeable.
If you do have noticeable difference, please open a new topic and we'll look into this there.

[privatex]

Well first stereo input is ride 1 which have ps, second is tom 4 stereo too with ps which I use for second ride cymbal but without activated positional on both inputs. The main differencies is in hi level value, on ride 1 is around 400 and on second even 1023 doesnt help it's to hot.
I learned that problem can be bunch of other tiny things so I will do tests again and post results. It isn't huge problem at all, I use second 3 way cymbal on that input with some resistors so it is ok, I'm just curious as I said, this should not be happening.

[airflamesred]

I have noticed that input 55 doesn't seem to update after doing a 'send all'. It stays blue.

Just tried to reproduce it and it turns black. If you do really have this problem, please open a new topic with the steps to reproduce it and I work on it.

Will do.