Latest MegaDrum firmware version

[ibanman555]

Did you press and hold left button during power-up to enter firmware update mode?

[kevin251]

Did you press and hold left button during power-up to enter firmware update mode?

Thanks @ibanman555
I have selected my FW file megadrumSTM32d_56_20200331.bin
I get the "StartUpdateOnPC message in my window, I press Start and after a few seconds it goes back to MegaDrum not responding
This is my front panel so could you indicate which "left" button you are referring to during power-up?

[ibanman555]

I get the "StartUpdateOnPC message in my window

Which window? A window on your computer or the screen on MegaDrum?

According to your photo, #2 should be a knob and a button. So push and hold the knob/button in before powering on to enter firmware mode.

[kevin251]

Thanks @ibanman55

Which window? A window on your computer or the screen on MegaDrum?

On MegaDrum

According to your photo, #2 should be a knob and a button. So push and hold the knob/button in before powering on to enter firmware mode.

So push/hold #2 and then power on with #1, right?

I will try again on Friday
Thanks again

[ibanman555]

Correct. Are you updating firmware through MegaDrum Manager FX?

[kevin251]

Correct. Are you updating firmware through MegaDrum Manager FX?

Thanks for your input @ibanman555 - not sure which shimmy did it but I've managed to update the FW at last! It was either a Java update or resetting the Midi In/Out, I think?????

On to assigning the notes now

Thanks again

[yoyo]

Unable to download any firmware files says failed - blocked.

[dmitri]

Post a screenshot showing the "block" message. I suspect it is your firewall or antivirus.

[yoyo]

Disabled safe browsing was able to download files. I purchased from someone else in believe 2017 built by yourself a 32 input unit Firmware version 20140171 w/ MCU Atmega 1284. Running MegaDrum Manager FX version 2020040 telling me For full compatiblity between MegaDrum Manager FX and MegaDrum you should upgrade to version 20200329 or newer. Am I able to upgrade and if so which file to use.

Thank you.
Avid user since then.

[dmitri]

Please read the first post - it explains how to choose the correct firmware file for your MCU.