PCB Inputs Jacks v1.8 for All In One PCB v2.8

[Synthex]

Here is the new PCB Inputs Jacks v1.8 for All In One PCB v2.8 !

PCB Inputs v1.8 mini T.gif

PCB Inputs v1.8 mini B.gif

Here is the PDF file :

PCB Inputs v1.8.pdf

HH Pedal Jumpers configuration :

PCBv1.8 Jumpers.jpg

In this example, Jumper A and Jumper C are ON.

Jumper A : High Input Impedance
Jumper B : Low Input Impedance
Jumper C : Tip = +5Volts ; Ring = Input
Jumper D : Ring = +5Volts ; Tip = Input


For Roland FD-8, use the B and D jumpers.

[efbe]

Here is the new PCB Inputs Jacks v1.8 for All In One PCB v2.8 !

PCB Inputs v1.8 mini T.gif

PCB Inputs v1.8 mini B.gif

Here is the PDF file :

PCB Inputs v1.8.pdf

-How com, that the "text" is miroor image on both sides ???

efbe

[Synthex]

The copper side is seen from above, by transparency.

You must return this picture to the copper side to build the PCB (like the toner transfer method).

[daddy4life85]

How hard is it to create a simple silk screen for the text/graphics?

[Synthex]

How hard is it to create a simple silk screen for the text/graphics?

It's hard to do.
Maybe with special transfer paper ...

[AwDeOh82]

Thanks Synthex

[NovaKaine]

Can this be used with the 2.5 or 2.7 version?

[ruffneck]

Synthex, could you also post the gerber files for this layout? Also what make and model are the TRS connectors? Where can these be bought?

Thanks,

Kari

[Synthex]

Can this be used with the 2.5 or 2.7 version?

Yes, it can be used with the 2.5 or 2.7 version.
Just the jumper "Pedal Impedance" is not usable with these versions.

[Synthex]

Synthex, could you also post the gerber files for this layout?

I will do it.

Where can these be bought?

Not yet available.