>>> KIT AVAILABLE <<< All In One v3.1 PCB 56i Kit for sale !

[Synthex]

Update march 2010 : Kit Version 3.2 is available : http://www.megadrum.info/forums/viewtopic.php?f=3&t=1139


PCB v3.1 Professional achievement :
- Double Layer
- Copper Thickness 70 um
- 120 mm x 100 mm with mounting holes
- Top Silk Screening
- Blue Solder Mask

PCB_v31.jpg

56 triggers inputs connector, USB connector, MIDI connector (In and Out/Through), LCD screen connector, Keyboard connector, ICSP connector ...
Fully USB plug'n play, works with all Windows, Mac OS, Linux, ... (Fully USB2 compliant)
All 56 Inputs of this kit are protected against ±15kV electrostatic discharge (ESD) shocks (Fully IEC1000-4-2 compliant)
Lot of features : USB on board, optional power supply, and much more ...


Here is a quick Manual with the List of components, Connectors pinouts and Schematics :

PCB_AIO_56i_v3.1_Manual_mini.jpg

All In One PCB v3.1 by Synthex - Quick Manual.pdf

The 56i v3.2 Main Kit is :

- PCB : 1* All In One PCB v3.2 56 inputs (120mm x 100mm)
- PCB : 1* Keyboard PCB (40mm x 34mm)
- ICs : 1* Programmed Atmega644-20PU with bootloader and latest firmware
- ICs : 1* Programmed 18F14K50 USB 2.0
- ICs : 7* 74HC4851
- ICs : 1* L7805, 1* 6N138
- Resistors : 1* 47, 1* 470, 2* 100, 4* 220, 3* 1k, 1* 1k5, 11* 4k7, 1* 6k2, 2* 10k, 5* 47k
- Capacitors : 2* 15pF, 2* 22pF, 2* 1nF, 10* 100nF, 1* 470nF, 3* 47uF, 1* 100uF
- Inductors : 1* 68uH
- Diodes : 4* 1N4007, 3* 1N4148
- Crystals : 1* 20MHz, 1* 12MHz
- HE10 Connectors : 1* HDR-2X8, 1* HDR-2X13, 1* HDR-2X20, 1* IDC-2X8, 1* IDC-2X13, 1* IDC-2X20
- .100" Male Polarized Headers Connectors : 2* 2pin, 1* 3pin, 1* 4pin, 4* 5pin, 1* 6pin
- .100" Polarized Connectors with 30 cm leads : 2* 2pin, 1* 3pin, 1* 4pin, 3* 5pin
- .100" Connectors : 2* Jumper
- Connectors : 1* USB Type B Socket
- ICs Sockets : 1* 8 pin, 7* 16 pin, 1* 20 pin, 1* 40 pin
- Display : 1* LCD Display 2*16 White Characters Blue Backlight, 1* Blue LED
- Keyboard : 4* D6 Pushbutton Switch
- Wires : Flat Ribbon Cable 16 Conductors


The 56i v3.2 Inputs Kit is :

- PCB : 1* 32 inputs PCB with USB (180mm x 40mm)
- PCB : 1* 24 inputs PCB (107mm x 40mm)
- Stacked jacks Connectors : 15* CLIFF S1-1125W with 30* CL1406 Nuts
- Connectors : 2* DIN 5 Pin Chassis Socket
- Connectors : 1* USB Type B Socket
- HE10 Connectors : 1* HDR-2X13, 1* IDC-2X13, 1* HDR-2X20, 1* IDC-2X20
- .100" Male Polarized Headers Connectors : 1* 4pin
- .100" Polarized Connectors with 30 cm leads : 1* 4pin
- .100" Connectors : 3* HDR-1X3
- .100" Connectors : 4* Jumper


Here is prices of kits :

56i v3.2 Main Kit : 89 euros
Registred airmail shipping around the world : 14 euros
Fees : 6 euros
Dmitri's donation : 10 euros
The total of the order for the MAIN KIT is 119 euros.


56i v3.2 Main Kit : 89 euros
56i v3.2 Inputs Kit : 37 euros
Registred airmail shipping around the world : 16 euros
Fees : 7 euros
Dmitri's donation : 10 euros
The total of the order for the MAIN KIT and INPUTS KIT is 159 euros.


Payment may be made by Bank Wire Transfer or by Paypal.

Please send me a private message to order the kit.
Thank you.


This kit is a collection of parts and not a finished product and you have to solder and assemble it yourself !

VIDEO : Kit v3.1 56i in action - Video by Bulok

Kit_v31_ICs.jpg

Kit_v31_Components.jpg

Kit_v31_Connectors.jpg

Kit_v31_Cables.jpg

v31_LCD.jpg

Best regards,
Synthex


All v2.8 Kit history : http://www.megadrum.info/forums/viewtopic.php?f=3&t=456
All v2.7 Kit history : http://www.megadrum.info/forums/viewtopic.php?f=3&t=187
All v2.4 Kit history : http://www.megadrum.info/forums/viewtopic.php?f=3&t=108

[Synthex]

Inputs boards are available :


32 inputs Jack PCB = 9 stacked jacks or 18 single jacks + USB + MIDI :

IB_32i.jpg

24 inputs Jack PCB = 6 stacked jacks or 12 single jacks :

IB_24i.jpg

Keyboard PCB :

IB_KB.jpg

IB_Compo.jpg

15_Stacked_Jacks.jpg

[Synthex]

To help assembling, here are some pictures and tips :


---------------------------------------------------------

BEFORE START PLEASE WATCH THESE VIDEOs :
http://www.youtube.com/watch?v=I_NU2ruzyc4
http://www.youtube.com/watch?v=TH9jL-L0K5Q


---------------------------------------------------------

PCB_v31_Finish.jpg

---------------------------------------------------------

Components must be located on the side of the top white silk screening.
You just need soldering on the bottom side.
Holes on the pcb are copper coated to connect both sides of the board.

---------------------------------------------------------

Identification of components :

yellow violet black gold = 47 ohms
brown black brown gold = 100 ohms
red red brown gold = 220 ohms
yellow violet brown gold = 470 ohms
brown black red gold = 1 Kohms
brown green black brown brown = 1.5 Kohms
yellow violet red gold = 4.7 Kohms
blue red red red = 6.2 Kohms
brown black orange gold = 10 Kohms
yellow violet orange gold = 47 Kohms

15 = 15 pF
22 = 22 pF
1n = 1 nF
104 = 100 nF
470nK = 470 nF

12.000 = 12 MHz
20.000 = 20 MHz

---------------------------------------------------------

On the PCB, the square pad is always the pin number 1.

---------------------------------------------------------

Do not solder ICs (U1, U2, U3, U5 to U11) on the PCB.
You must use sockets.

---------------------------------------------------------

1N4148, 4N4007, 47 uF, 100 uF and all ICs (U1 to U11)
are polarized and MUST be inserted in only ONE direction.

---------------------------------------------------------

The green component, with a SILVER ring, is the inductor (L1).

---------------------------------------------------------

For the "R lcd" you can use the 47 ohms resistor (the big blue resistor).

---------------------------------------------------------

To test, you can use a jumper on the "Power Selection" connector :

PowerJumper.jpg

---------------------------------------------------------

HH_Jumpers.jpg

Jumper A : High Input Impedance
Jumper B : Low Input Impedance
Jumper C : Tip = +5Volts ; Ring = Input
Jumper D : Ring = +5Volts ; Tip = Input

---------------------------------------------------------

[Synthex]

Reserved post

[Synthex]

Reserved post

[strikelet]

Excellent!

[davem]

Just ordered mine

[jdigdug]

I have a couple of quick questions:
1. Will there be an extra cost for the stacked jacks input PCBs?
2. What are the minimum dimensions for an enclosure with 32-inputs (19 stereo jacks? + usb)? Would this fit in a 6"x4"x2" enclosure? I'm looking at getting a 1/3 U enclosure as well (5.5"x5.5"x1.75"), but I worry that it would be too small.

Thanks

[Synthex]

1. Will there be an extra cost for the stacked jacks input PCBs?

Yes, there will be an extra cost for the stacked jacks input PCBs.
The price is not fixed yet, but it will not be expensive.

2. What are the minimum dimensions for an enclosure with 32-inputs (19 stereo jacks? + usb)? Would this fit in a 6"x4"x2" enclosure? I'm looking at getting a 1/3 U enclosure as well (5.5"x5.5"x1.75"), but I worry that it would be too small.

32 inputs PCB (9 stacked jacks or 17 jacks) = 184 mm
32 inputs PCB (9 stacked jacks or 17 jacks + USB) = 202 mm
32 inputs PCB (9 stacked jacks or 17 jacks + USB + MIDI) = 249 mm
24 inputs PCB (6 stacked jacks or 12 jacks) = 122 mm

[davem]

Hi Synthex,

Any more word on the input jacks? Do you also know what parts (if any) you intend to include with them?

Thanks!